Stuart - SI30H - Hybridisation oven
Manufactured by Stuart
A very versatile 20 litre hybridisation incubator and combined rocker shaker which only requires a minimum of bench space.
A very versatile 20 litre hybridisation incubator and combined rocker shaker which only requires a minimum of bench space. The incubator temperature is accurately set via the easy to use encoder controls and displayed by a bright LED. Forced air circulation combined with microprocessor control means outstanding temperature uniformity.
The `safety first' design includes an over-temperature protection system that automatically tracks the set temperature and controls the heater in the event of a fault. The smart system displays error codes indicating a fault has occurred or if the set temperature has been interrupted. The incubator also cuts power to the motor if it overheats or stalls.
The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over' door mechanism gives excellent access to the incubator.
Conversion of the unit to a rocker shaker is fast and easy. Simply remove the rotisserie and pull forward the platform located at the rear of the incubator. The gentle rocking action is ideal for the washing stage of most hybridisation procedures. Rocking speed is fully variable allowing optimisation depending on application. A range of hybridisation bottles are available made from tough Pyrex® glass and leak proof PTFE faced screwcaps
The `safety first' design includes an over-temperature protection system that automatically tracks the set temperature and controls the heater in the event of a fault. The smart system displays error codes indicating a fault has occurred or if the set temperature has been interrupted. The incubator also cuts power to the motor if it overheats or stalls.
The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over' door mechanism gives excellent access to the incubator.
Conversion of the unit to a rocker shaker is fast and easy. Simply remove the rotisserie and pull forward the platform located at the rear of the incubator. The gentle rocking action is ideal for the washing stage of most hybridisation procedures. Rocking speed is fully variable allowing optimisation depending on application. A range of hybridisation bottles are available made from tough Pyrex® glass and leak proof PTFE faced screwcaps
Active Questions & AnswersAsk a Question
There are no current Discussions
Hybridization Ovens Service ProvidersView All (29)
Documents & Manuals
There are no Documents or Manuals available.
Features of SI30H - Hybridisation oven
- Compact design * Rotisserie and rocker in one unit * Up and over door for accessibility * Accurate temperature control * Advanced safety features * Variable speed control
General Specifications
Depth | 380 mm |
Height | 435 mm |
Width | 380 mm |
Power Requirements | 230V, 50Hz, 350W |
Weight | 24 kg |
Incubator Orientation | Benchtop |
Additional Specifications
Nominal capacity
20 litres
Temperature range
Ambient + 8°C to 80°C
Temperature fluctuation (at 37°C)
±0.5°C
Temperature variation
±0.5°C
Display type
LED
Display resolution
0.1°C
Rotational speed range
2 to 10rpm
Rocker speed range
5 to 70 oscillations minute
Internal dimensions (w x d x h)
250 x 230 x 200mm