Stuart - SI60D - Clear Incubator, Digital

Manufactured by  Stuart
Follow this Equipment

Constructed from clear Acrylic® polymer to give total visibility of samples at all times. Designed for easy access with...

Constructed from clear Acrylic® polymer to give total visibility of samples at all times. Designed for easy access with hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.   
   
For digital model SI60D, setting the temperature is accurately achieved via the LCD display. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37°C. Additionally there is a temperature safety cut-out set at 72°C.   
   
The incubator is supplied flat packed, for assembly at point of use. Assembly is simple and requires only a screwdriver.
Active Questions & AnswersAsk a Question

There are no current Discussions

General Purpose Incubator Service ProvidersView All (28)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of SI60D - Clear Incubator, Digital
  • Full visibility of samples   * Easy access to working chamber   * Digital control   * Many applications:   
    • Plant propagation   
    • Humidity tests   
    • Simulation of tropical conditions   
    • Incubation of complete instruments   
    • Corrosion testing
General Specifications
Depth 390 mm
Height390 mm
Width 600 mm
Power Requirements 230V, 50Hz, 350W
Weight11.2 kg
Incubator Orientation Benchtop
Additional Specifications

Temperature range    
Ambient +5°C to 60°C   
Temperature fluctuation at 37°C    
±0.1°C   
Temperature variation between shelves    
±0.3°C   
Nominal volume    
60 litres   
Internal dimensions (w x d x h)    
450 x 380 x 380mm

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com