The 125 ml PressureSyn reactors are certificated and rated to a maximum pressure of 100bar and temperature of 200C. The easy to open clamp mechanism also features a unique Safety Key designed by the chemists and engineers at Nottingham that does not allow the vessel cover to be removed without first releasing any residual pressure. Each Safety Key and vessel clamp are unique therefore ensuring that it cannot be undone with a spare key, only the Safety Key that is used to release any residual pressure of the reactor in use will open the clamp. Even with an operator opening the standard pressure relief valve in the correct manner it is possible to have a small blockage in a valve leading to some residual pressure. This required a safety design feature to be developed for the reactors to ensure that this was not possible; therefore each Safety Key valve assembly has a pin at its tip ensuring that when extracted will leave behind a small hole for any residual pressure to be released.   
   
Each individual reactor is tested to 170bar pressure, witnessed and certificated at this pressure by Zurich Insurance, giving our customers secure knowledge that this reactor when in use at its maximum it is actually under stressed.   
The standard safety features of PressureSyn comprise a double pressure relief system, including bursting disk and pressure relief valve.   
   
PressureSyn units are designed to work on any magnetic hotplate stirrer; a special DrySyn adapter plate allows the secure placement of the reactors on the hotplate stirrer; together with enhanced temperature transfer and the ability to control temperature from a standard hotplate stirrer’s temperature probe.