LNI SWISSGAS - Sx 6000C1
Manufactured by LNI SWISSGAS
No Documents
Cal Sys Sx 6000 C1
Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated.
The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5
gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3.
With the optional GPT circuitry it is possible to verify the coherence of
NO,NO2 and O3 measurements, and to determine the converter’s efficiency of the NOx analyser
In order to feed it with air, we recommend the conjoint use of a Sonimix 3052/3057.
The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5
gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3.
With the optional GPT circuitry it is possible to verify the coherence of
NO,NO2 and O3 measurements, and to determine the converter’s efficiency of the NOx analyser
In order to feed it with air, we recommend the conjoint use of a Sonimix 3052/3057.
Active Questions & AnswersAsk a Question
There are no current Discussions
Calibration Service ProvidersView All (14)
Documents & Manuals
There are no Documents or Manuals available.
Features of Sx 6000C1
- No cylinders
- Accurate
- Flexible
General Specifications
There are no General Specifications available.
Additional Specifications
Dilution by Mass Flow Controlers
Dilution range 1/30 to 1/1000 @ 3.5 L/min
Options :
- 3 additional inlets
- Permeation oven for 1 tube (up to 3 oven/device)
- Permeation oven for NO and NO2 including converter
- Permeation oven for 6 tubes
- Ozone generator 30 to 500 ppb + GPT circuits
- Remote command