FRITSCH GmbH - ANALYSETTE 3 SPARTAN
Simple Sieving for all tasks
The little sister of the ANALYSETTE 3 PRO for all typical sieving tasks in the laboratory with optical adjustment of the amplitude on the running instrument. Complete with the practical FRITSCH sieve stack tensioning system EASYTWIST and the possibility of automatic evaluation of the sieve analysis using the extensive FRITSCH evaluation software AUTOSIEVE.
The ANALYSETTE 3 SPARTAN is also suitable for quantitative particle size analysis of solids and suspensions of all kinds through dry or wet sieving with woven test sieves.
It is convertible into a micro mill for fine comminution of dry laboratory samples or solids in suspensions and for homogenisation of emulsions or pastes.
WORKING PRINCIPLE
The ANALYSETTE 3 is a “shaking sieve” system in the classic sense in which an electromagnetic drive causes the sieves to oscillate in a vertical direction. The material to be sieved is periodically propelled upward off the sieve fabric and forced through the mesh of the attached test sieve as it falls back down.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of ANALYSETTE 3 SPARTAN
- Automatic sieve analysis with sieve evaluation software AUTOSIEVE * Quick conversion to Vibratory Micro Mill PULVERISETTE 0 * Exact entry of the sieving time via a precise digital timer * Optical display of the amplitude during sieving * Ergonomically installed robust soft touchpad * EASYTWIST sieve stack tensioning with steel-reinforced plastic bands included * Up to 10 test sieves can be used simultaneously per working cycle – allowing up to 5 sieving operations to be performed at the same time * Optimum power consumption prevents warming up of the sieving system * Recyclable plastic housing * Certified safety (CE mark) * 2-year warranty
General Specifications
| Depth | 40 cm |
| Height | 20 cm |
| Sieve Type | Sieve Shaker |
| Width | 37 cm |
| Power Requirements | 100-240 V/1~, 50-60 Hz |
| Peak Power | 50 W |
| Weight | 26 kg |
Additional Specifications
Method of analysis: Sieving
Sieving action: two-dimensional
Dry sieving
Measuring range:
20 µm - 63 mm*
Max. sample quantity (approx.):
for sieves < 63 mm: up to 2 kg*
for sieves < 100 µm: up to 100 g*
Sieving time (approx.):
3 - 20 min*
Wet sieving
Measuring range:
20 µm - 10 mm
Max. sample quantity (approx.):
20 - 100 g*
Sieving time (approx.):
3 - 10 min*
Max. weight of sieve stack:
3 kg
Amplitude:
0.5 - 3 mm
Amplitude control:
manual
Sieve diameters:
100 mm, 200 mm or 8"
Max. number of sieves per sieve stack:
10 (50 mm height) or 16 (25 mm height)
Max. height of sieve stack:
550 mm
Automatic sieve analysis with evaluation software AUTOSIEVE:
Yes
Convertible to Micro Mill PULVERISETTE 0:
Yes