HEMCO Corporation - UniFlow FM

Manufactured by  HEMCO Corporation
Follow this Equipment

Designed for synthesis, distillation and other rack type operations where tall apparatus is used or equipment is rolled into the work area.

UniFlow FM Fume Hoods are designed for synthesis, distillation and other rack type operations where tall apparatus is used or equipment is rolled into the work area. Full 70" viewing height for ease of access and unobstructed view of fume chamber. Chamber sizes include 48", 60", 72", 96", & 120" and depths of 30", 36", and 48". Fume hood features double-wall construction with an angled picture frame opening with either double vertical side sashes or horizontal sliding glass doors. A removable upper front panel allows access to ducting connections and electrical services from a single point electrical box, 115V60Hz AC operation. The varaflow baffle system maintains a uniform airflow to the bell-shaped exhaust collar. UniFlow Walk-In hoods are available in standard or special sizes to meet various applications. Modular construction can be shipped disassembled for on-site assembly.

Active Questions & AnswersAsk a Question

There are no current Discussions

Fume Hoods Service ProvidersView All (10)

Request Support
Features of UniFlow FM
  • Composite fibreglass panel construction meets or exceeds fire-retardant codes and has superior chemical resistance. The glass smooth surface provides excellent illumination and is easy to clean. The modular design permits the UniFlow FM Hood to be shipped completely assembled or knocked down for on-site installation.
  • Vertical moving viewing sash is a clear tempered safety glass with corrosive resistant PVC framing with full-length sash handle. Horizontal sliding and combination sashes are also available.
  • Lighting in fume chamber is provided by a vapour-proof energy efficient fluorescent light fixture and convenient control switch wired to junction box. Explosion-proof models are also available but not wired (Must be wired to comply with local codes). All electrical components and services are UL and CSA listed. 115V 60Hz. Other voltage Hz and phase options are available for international and industry requirements.
  • UniFlow FM Fume Hoods can be equipped with plumbing, electrical services, exhaust ducting, blowers and filters to meet your exact requirements. Distillation racks, mobile tables and shelving are also available. Please consult HEMCO Technical Service for assistance in selection.
  • Colour choices are pearl white exterior with pearl white, silver beige, pewter gray, or zircon blue access-panel and airfoil. Custom colours are also available.
  • Horizontal Sliding Sash - for 72” & 96” hoods only.

Three Types:

1. Uniflow Walk-in Bypass Fume Hood with Vapor-Proof Light

Superstructure to be modular composite chemical resistant FRP nonmetallic construction. Interior fume chamber to be glass smooth with adjustable VaraFlow baffle system and bell-shaped exhaust collar. Picture frame upper and lower sash opening with counter balanced upper and lower sashes of clear tempered safety glass with chemical resistant PVC framing, track and aerodynamic sash lift. Can be shipped knocked down for onsite erection. Vapour-proof light fixture and switch prewired to single point junction box, 115 volts, 60Hz AC, All electrical components UL Listed.

2. Uniflow Walk-In Bypass Fume Hood with Explosion-Proof Light

Same as #1 above except equipped with explosion-proof vapour-proof light fixture Class I, Group C & D, Class II Group E, F & G electrical fixture installed but not wired, must be wired to comply with local codes. 115 volt, 60Hz AC. For other explosion-proof electrical options see page 29 and explosion-proof exhaust blowers on pages 34-35. All electrical components UL Listed.

3. Phenolic Resin Worksurface

Phenolic resin work surfaces are recommended for general laboratory work where high concentrations of solvent, acids and alkalies are being worked with. Work surface combines excellent chemical resistance with superior scratch and wear resistance. Surface is dished to contain spillage. Colour: black

General Specifications

There are no General Specifications available.

Additional Specifications

Uniflow Walk-in Bypass Fume Hood with Vapor-Proof Light. Superstructure to be modular composite chemical resistant FRP nonmetallic construction. Interior fume chamber to be glass smooth with adjustable VaraFlow baffle system and bell-shaped exhaust collar.

Picture frame upper and lower sash opening with counter balanced upper and lower sashes of clear tempered safety glass with chemical resistant PVC framing, track and aerodynamic sash lift. Can be shipped knocked down for onsite erection. Vapour-proof light fixture and switch prewired to single point junction box, 115 volts, 60Hz AC, all electrical components UL Listed.

Exhaust Air Volume Required for 100 FPM with sash fully open equals 773 CFM    
Exhaust Air Volume Required for 100 FPM with sash 50% open equals 385 CFM

Series Modals

HEMCO Corporation - 11041, 11044, 11045

[+] View Model Specifications

HEMCO Corporation - 11048, 11042, 11043

[+] View Model Specifications

HEMCO Corporation - 11050, 11052, 11053

[+] View Model Specifications

HEMCO Corporation - 11051, 11054, 11055

[+] View Model Specifications

HEMCO Corporation - 11060, 11062, 11063

[+] View Model Specifications

HEMCO Corporation - 11061, 11064, 11065

[+] View Model Specifications

HEMCO Corporation - 11070, 11072, 11073

[+] View Model Specifications

HEMCO Corporation - 11071, 11074, 11075

[+] View Model Specifications

HEMCO Corporation - 20418, 21418, 22418

[+] View Model Specifications

HEMCO Corporation - 20518, 21518, 22518

[+] View Model Specifications

HEMCO Corporation - 20618, 21618, 22618

[+] View Model Specifications

HEMCO Corporation - 20818, 21818, 22818

[+] View Model Specifications
NewsView All Articles

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com