Gilson - 402 Syringe Pump

Manufactured by  Gilson
Follow this Equipment

Available in both single and multiple syringe configurations, the 402 Syringe Pump allows systems to deliver both large and small volumes.

Ensuring speed and reliability for repetitive liquid handling tasks.   
   
Available in both single and multiple syringe configurations, the 402 Syringe Pump allows systems to deliver both large and small volumes without sacrificing precision.
Active Questions & AnswersAsk a Question

There are no current Discussions

Need Equipment Support?

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of 402 Syringe Pump
  • Delivers volumes from 1.0 µL to 25 mL with excellent precision   * Adjustable flow rates to compensate for different sample viscosities   * Single-and dual-syringe with tee junction and dual-syringe with valve modules available   * Dual-syringe models provide extreme flexibility for quick and easy access to syringes, allowing you to create the configuration that will precisely fit your application
General Specifications

There are no General Specifications available.

Additional Specifications

Driving Mechanism:    
Two stepper motors with independently-operated, three-port, rotary valve   
Communication Interface:    
GSIOC   
Reproducibility:    
0.8% at 10 µL   
Accuracy:    
98.2% at 10 µL   
Flow Rate:    
1 µL/min to 120 mL/min   
Injection Volume:    
1.0 µL–25 mL   
Liquid-Contact Materials:    
FEP, PTFE, PEEK, Ekonol, glass and ceramics   
Maximum Dilution Ratio:    
Up to 500:1 using Gilson samplers   
Maximum Pressure:    
0.8 MPa (8 bar, 110 psi) for 0.1- to 10-mL syringes   
0.3 MPa (3 bar, 40 psi) for 25-mL syringe   
Minimum Piston Travel Time:    
From 1.0 second to 10 hours for one complete stroke   
Power Requirements:    
Frequency: 50–60 Hz   
Voltage: 100–120 or 220–240V; mains voltage fluctuations not to exceed ±10% of the nominal voltage   
Software:    
Via Gilson TRILUTION® Software   
Syringe Capacity:    
100, 250 or 500 µL; 1, 5, 10 or 25 mL   
Dimensions (w x d x h):    
17 x 20 x 24 cm (6.7 x 7.9 x 9.4 in.)   
Weight:    
5 kg (11 lbs.) for single-syringe model   
7 kg (15.4 lbs.) for dual-syringe model

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com