NuAire - FumeGard 164 Polypropylene
Manufactured by NuAire
164 Polypropylene Fume Hood
The FumeGard NU 164 Polypropylene Fume Hood is an excellent choice in a By-Pass Fume Hood for these compelling reasons:
- NO RUST, NO Exposed metal
- Ergonomic Design
- 100% Polypropylene with seam welded construction. longer lasting, metal free
- By-Pass designed to capture, contain and exhaust
- Versatility of a Custom Hood and optional use of other thermoplastics so you get a Fume Hood built to your unique specifications
Models Include:
- NU-164 (24" Depth
- NU-164-424
- NU-164-524
- NU-164-624
- NU-164-824
- NU-164 (30" Depth)
- NU-164-430
- NU-164-530
- NU-164-630
- NU-164-830
Active Questions & AnswersAsk a Question
There are no current Discussions
Fume Hoods Service ProvidersView All (9)
Documents & ManualsView All Documents
Features of FumeGard 164 Polypropylene
- Superstructure is constructed from 1/2-inch Stress Relieved, All Seam Welded White Polypropylene
- All Negative Pressure Interior
- Air By-Pass feature promotes better uniform face velocity during window operations
- Sealed Interior Fluorescent Lighting: 100 Foot-Candles (1076 LUX)
- Electronic Fluorescent Lamp Ballast
- Counterbalanced Sliding Lexan View Screen: 18" (457mm) maximum opening to fully closing
- Flush Mounted Exterior/Interior Plumbing Chase Access Panels
- Polypropylene Service Valves (except natural gas)
- Connection Provision for venting a base cabinet
- Removable Rear Baffle for maintenance
- Reinforced 1/2-inch Thick Polypropylene Work Surface
- Lower Work Access Opening Airfoil
- PVC Electrical Junction Box
- Modular Electrical Component Construction
Factory Options
- Ground Fault Circuit Interrupter for duplex outlet(s)
- Remote Controlled Service Valves for gas, air, vacuum available In brass, tin-lined
- Brass, PVC, PVDF, Teflon or Polypropylene
- Polypropylene, Teflon or PVDF Gooseneck Faucets
- Additional Duplex Outlet(s) with PVC cover
- Cascade or Single Rinse Tanks with/without Nitrogen purge
- Air Flow Alarm Systems
- Exhaust Interlocks for building controls
- Base Support Stands
- DI or N2 Teflon Spray Guns
- Teflon, PVDF, Or Polypropylene Dip Tanks With/Without Drains
- Polypropylene Or PVDF Sinks with Hot/Cold or DI Water Faucets
- Teflon Liquid/Air Aspirators to syphon chemicals
- Rear Exhaust Duct Wash-down System
- PVDF Lined Interior
- Composition Stone/Modified Epoxy Resin Work Surfaces
- Flame Retardant Polypropylene Fume Hood
- Front Slanted Control Panel
- Polypropylene Exhaust Damper with Quadrant Lock
- Custom Polypropylene Sinks with Chemically Resistant "P"-Trap
General Specifications
Airflow (CFM) | 506 CFM |
Depth | 34.5 in |
Height | 60.5 in |
Internal Depth | 25.5 in |
Internal Height | 48 in |
Width | 48.5 in |
Internal Width | 38.5 in |
Construction | Complete one-piece benchtop polypropylene |
Face Velocity (FPM) | 100 |
Fume Hood Type | Conventional Ducted |