Labconco - Protector Demonstration Hoods

Manufactured by Labconco

Protector Demonstration Hoods Manual

Protector Demonstration Hoods are low profile, light-duty fume hoods designed to provide a clear, unobstructed view of...

Protector Demonstration Hoods are low profile, light-duty fume hoods designed to provide a clear, unobstructed view of procedures from all sides during educational demonstrations.

Protector Demonstration Hoods are offered individually or as a system including Cart with Work Surface, Lower Transition Adapter and FilterMate Portable Exhauster for use with two Carbon Filters or one Carbon Filter and one HEPA Filter in any combination.

Active Questions & AnswersAsk a Question

There are no current Discussions

Fume Hoods Service ProvidersView All (9)

Request Support

Manuals & DocumentsFeaturesSpecifications

Documents & ManualsView All Documents

Protector Demonstration Hoods Manual

Features of Protector Demonstration Hoods

Features

Deep 23" interior to easily accommodate a variety of apparatus
Ergonomic air foil with aerodynamic Clean-Sweep airflow openings
Upper containment sash foil to bleed air into the enclosure to direct contaminants away from operator's breathing zone
Upper dilution air supply
Clear rear baffle to direct air streams to the back of the interior for removal through exhaust connection
Side-entry air foils
Glacier white and gray, dry powder epoxy-coated aluminum frame
Tempered safety glass front sash, sides, rear baffle and top for total visibility
8" or 10" high sash opening depending on model
Ergonomic angled sash that pivots upward and locks to a 20" or 29.3" height depending on model
Lower exhaust tissue screen
Two utility ports with iris openings
Flexible exhaust options. 2" x 10" rectangular exhaust collars on the top and bottom allow for connection to ductwork for exhausting to the outside or to a FilterMate™ Portable Exhauster for filtered removal of fumes and/or particulates.

Required Accessories

Remote blower, house exhaust or FilterMate™ Portable Exhauster (models 3944300 and 3944301 only)
Ductwork (models 3944300 and 3944301 only)
Work Surface (models 3944300 and 3944301 only)
Supporting Base (models 3944300 and 3944301 only)
Carbon Filter Cell (models using FilterMate only)

General Specifications

There are no General Specifications available.

Additional Specifications

2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to ductwork for exhausting to the outside or to a FilterMate™ Portable Exhauster for filtered removal of fumes and/or particulates.

Series Modals

Labconco - 3944300

[+] View Model Specifications

Labconco - 3944301

[+] View Model Specifications

Labconco - 3945000

[+] View Model Specifications

Labconco - 3945001

[+] View Model Specifications

Labconco - 3945020

[+] View Model Specifications

Labconco - 3945021

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com

Depth	29.1 in
Height	22.8 in
Internal Depth	23 in
Internal Height	22.8 in
Width	33.6 in
Power Requirements	N/A
Fume Hood Type	Benchtop Ductless
Additional Model Specifications	Product Subcategory: Educational Blower Requirements: Remote blower or FilterMate Portable Exhauster and filters required Compliance: SEFA 1-2002, Modified ASHRAE 110-1995, ANSI Z9.5-1993 Other: - Ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils. - Glacier white and gray, dry powder epoxy-coated aluminum frame; tempered safety glass front sash, sides, rear baffle and top for total visibility; lower exhaust tissue screen; two utility ports with iris openings; and 2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to ductwork for exhausting to the outside or to a FilterMate™ Portable Exhauster for filtered removal of fumes and/or particulates.

Depth	29.1 in
Height	32 in
Internal Height	32 in
Width	33.6 in
Power Requirements	N/A
Fume Hood Type	Benchtop Ductless
Additional Model Specifications	Product Subcategory: Educational Blower Requirements: Remote blower or FilterMate Portable Exhauster and filters required Compliance: SEFA 1-2002, Modified ASHRAE 110-1995, ANSI Z9.5-1993 Other: - Ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils. - Glacier white and gray, dry powder epoxy-coated aluminum frame; tempered safety glass front sash, sides, rear baffle and top for total visibility; lower exhaust tissue screen; two utility ports with iris openings; and 2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to ductwork for exhausting to the outside or to a FilterMate™ Portable Exhauster for filtered removal of fumes and/or particulates.

Depth	31.9 in
Height	58.8 in
Internal Depth	23 in
Internal Height	58.8 in
Width	39 in
Power Requirements	115 V, 60 Hz, 10 A, Domestic
Fume Hood Type	Benchtop Ductless
Additional Model Specifications	Product Subcategory: Educational Blower Requirements: No Blower Required. FilterMate included. Compliance: SEFA 1-2002, Modified ASHRAE 110-1995, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1 Other: - Ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils. - Glacier white and gray, dry powder epoxy-coated aluminum frame; tempered safety glass front sash, sides, rear baffle and top for total visibility; lower exhaust tissue screen; two utility ports with iris openings; and 2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to a FilterMate™ Portable Exhauster. - Includes cart of glacier white epoxy-coated tubular steel with black 1" thick solid epoxy dished work surface, handle bar, bottom shelf and 4" diameter toe-locking casters; and FilterMate™ Portable Exhauster designed for use with two Carbon Filters or one Carbon Filter and one HEPA Filters (filters not included), 8 feet of 5" ID flexible gray polypropylene hose, two clamps, a 4.88" OD Lower Transition Adapter for connection to the bottom of the Demonstration Hood, and an IEC 3-wire electrical cord with plug.

Depth	31.9 in
Height	68 in
Internal Depth	23 in
Internal Height	68 in
Width	39 in
Power Requirements	115 V, 60 Hz, 10 A, Domestic
Fume Hood Type	Benchtop Ductless
Additional Model Specifications	Product Subcategory: Educational Blower Requirements: No Blower Required. FilterMate included. Compliance: SEFA 1-2002, Modified ASHRAE 110-1995, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1 Other: - Ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils. - Glacier white and gray, dry powder epoxy-coated aluminum frame; tempered safety glass front sash, sides, rear baffle and top for total visibility; lower exhaust tissue screen; two utility ports with iris openings; and 2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to a FilterMate™ Portable Exhauster. - Includes cart of glacier white epoxy-coated tubular steel with black 1" thick solid epoxy dished work surface, handle bar, bottom shelf and 4" diameter toe-locking casters; and FilterMate™ Portable Exhauster designed for use with two Carbon Filters or one Carbon Filter and one HEPA Filters (filters not included), 8 feet of 5" ID flexible gray polypropylene hose, two clamps, a 4.88" OD Lower Transition Adapter for connection to the bottom of the Demonstration Hood, and an IEC 3-wire electrical cord with plug.

Depth	31.9 in
Height	58.8 in
Internal Depth	23 in
Internal Height	58.8 in
Width	39 in
Power Requirements	230 V, 50/60 Hz, 5 A, International
Fume Hood Type	Benchtop Ductless
Additional Model Specifications	Product Subcategory: Educational Blower Requirements: No Blower Required. FilterMate included. Compliance: SEFA 1-2002, Modified ASHRAE 110-1995, ANSI Z9.5-1993, CE Conformity Marking Other: - Ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper containment sash foil; upper dilution air supply; and side-entry air foils. Other features include: glacier white and gray, dry powder epoxy-coated aluminum frame; tempered safety glass front sash, sides, rear baffle and top for total visibility; lower exhaust tissue screen; two utility ports with iris openings; and 2" x 10" rectangular exhaust collars on the top and bottom to allow for connection to a FilterMate™ Portable Exhauster. - Includes cart of glacier white epoxy-coated tubular steel with black 1" thick solid epoxy dished work surface, handle bar, bottom shelf and 4" diameter toe-locking casters; and FilterMate™ Portable Exhauster designed for use with two Carbon Filters or one Carbon Filter and one HEPA Filters (filters not included), 8 feet of 5" ID flexible gray polypropylene hose, two clamps, a 4.88" OD Lower Transition Adapter for connection to the bottom of the Demonstration Hood, and an IEC 3-wire electrical cord with plug.