PHCBi - MCO-18ACL/MCO-18ACUVL
CytoGROW Optimal CO2 Incubators
Active Questions & AnswersAsk a Question
There are no current Discussions
CO2 Incubator Service ProvidersView All (28)
Documents & ManualsView All Documents
Features of MCO-18ACL/MCO-18ACUVL
- Wide Range of Applications
- InCu-saFe® Copper Stainless Steel Alloy
- SafeCell UV Protection (for UV Models)
- Direct Heat and Air Jacket System
- Integrated Microprocessor Control
General Specifications
Depth | 28 in |
Height | 35.4 in |
Internal Depth | 20.6 in |
Internal Height | 26.2 in |
Width | 24.4 in |
Internal Width | 19.3 in |
Chamber Volume | 170 L |
Weight | 205 lbs |
Additional Specifications
SHELVES
Maximum 15/chamber, 5 supplied standard; 22.8 X17.7X 0.5 / 579 X 450X 13mm (wXf-bX h) lip, 15.4 lbs./ 7 kg. capacity
TEMPERATURE CONTROL RANGE
+5ºC above ambient to 50°C
TEMPERATURE CONTROL UNIFORMITY DEVIATION
±0.25°C (in 25°C ambient, setting 37°C, 5% CO2, no load
CO2 CONTROL RANGE AND DEVIATION
0 to 20% ±0.15% (in 25°C ambient, setting 37°C, 5% CO2, no load)
INTERIOR HUMIDITY
95% RH at 37°C through evaporation via DHA heating system, optional reflective/deflective optical low-water sensor
TEMPERATURE AND CO2 CONTROL
LED., Setpoint resolution 0.1% and 0.1°C
OUTER DOOR
Reversible
ACCESS PORT
Single, 1.18/30 mm with silicone (non-VOC) stoppers (upper-left rear)
CONTAMINATION CONTROL
MCO-18ACL
inCu-saFe®
MCO-18ACUVL
inCu-saFe® / SafeCell UV / Active Background Contamination Control