tecaLAB - AHP-301MSP
Manufactured by tecaLAB
Stirring Cold/Hot Bead Bath
The Magnetic Stirring Plate, AHP-301MSP, is a bench top product that cools and heats many sizes and types of vessels while mixing the contents. The stirring bead bath uses aluminum Thermal Lab BeadsTM instead of water to conduct the heat away from your beaker or vial and a magnetic stir bar to stir the contents.
The AHP-301MSP can maintain the samples from 0 °C to 50 °C using thermoelectric (Peltier) technology. The AHP-301MSP includes speed control for the magnetic stirring. The system is an air cooled device and can be powered with 100-240 VAC 50/60 Hz power.
When not used as a stirrer it can double as an Electric Ice BucketTM keeping samples cool or hot with no racks or accessories needed. Sample vials and vessels easily slide into the Thermal Lab BeadsTM and remain in place until you move them. No more floating samples and trips to the ice machine.
The AHP-301MSP can maintain the samples from 0 °C to 50 °C using thermoelectric (Peltier) technology. The AHP-301MSP includes speed control for the magnetic stirring. The system is an air cooled device and can be powered with 100-240 VAC 50/60 Hz power.
When not used as a stirrer it can double as an Electric Ice BucketTM keeping samples cool or hot with no racks or accessories needed. Sample vials and vessels easily slide into the Thermal Lab BeadsTM and remain in place until you move them. No more floating samples and trips to the ice machine.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Asked bysbecker1226
Need Equipment Support?
Documents & Manuals
There are no Documents or Manuals available.
Features of AHP-301MSP
- PWM temperature control * Fluid process temperature range 0 °C to 50 °C * Internal and external RTD sensor * Adjustable stirring from 100 to 1000 RPM * Accommodates many vessel sizes * 2 liters of aluminum tecaLAB Thermal Lab BeadsTM included * Stainless steel, aluminum and acrylic construction * Doubles as an Electric Ice BucketTM when not used for stirring * Always On, Always Cold design: plug it in and leave it on indefinitely * Samples stay where you place them without racks or fixtures * No more floating or tipping samples * Holds capped and non-watertight vessels in place
General Specifications
Depth | 295 mm |
Height | 302 mm |
Internal Depth | 183 mm |
Temperature Range | 0 to 50 °C |
Internal Height | 152 mm |
Width | 274 mm |
Internal Width | 139 mm |
Power Requirements | 100-240 VAC, 50/60 Hz |
Weight | 16.5 lbs |
Construction | Stainless Steel, Aluminum & Acrylic |
Additional Specifications
Cooling Techology
Thermoelectric (Peltier), air cooled
Temperature Control
PWM with 4 independent PID zones
Sensor Type
3 wire RTD, 100 ohm, Platinum (internal)