METTLER TOLEDO - XPE Micro-analytical Balances
Manufactured by METTLER TOLEDO
No Documents
Higher capacity for dosing directly into your target vessel.
XPE are the only micro-analytical balances in the world with a hanging weighing pan. With minimal air turbulence in the weighing chamber, stabilization time is reduced and results are faster. XPE micro-analytical balances have motorized doors on both the outer and the smaller inner draft shields. It's easy to set up one SmartSens sensor to open both sets of doors for when you want to place your tare container on the balance - just wave your hand over it to activate. To keep air disturbance to a minimum for dosing, the other sensor can be used to open just the outer door. Left and right dosing possible.
Active Questions & AnswersAsk a Question
2Replies
Metller Toledo XPE 56
Recent Questions & Answers
Updated byWADRIAN
Balances Service ProvidersView All (24)
Documents & Manuals
There are no Documents or Manuals available.
Features of XPE Micro-analytical Balances
- 1µg readability with up to 50g maximum capacity: XPE micro-analytical balances deliver the highest capacity coupled with the lowest possible minimum weight. Dose directly into a larger tare container, saving valuable material and making significant cost reductions. XPE micro-analytical balances display unsurpassed accuracy even with the smallest of samples. Fast, easy and safe
- Balance Ready for Use: The StatusLight uses intuitive color to indicate the balance status. Green means ready, yellow is a warning, and errors such as out-of-level show up in red. Compliance at a glance.
- Minimizes Static Charges: The new embedded technology automatically detects static charges and warns the user when results are out of tolerance. For highest process security, anti-static measures can be employed to neutralize the charge and ensure the most accurate results.
- Unmatched Speed and Stability: The unique SmartGrid minimizes effects of air turbulence, so that stabilization times are greatly reduced when compared to a traditional weighing pan. Weigh continuously without interruptions – any spilled samples fall though the grid to the drip tray, where they will not affect your weighing result. Easy, safe and secure.
- Automatic Data Handling: METTLER TOLEDO’s LabX® software provides flexible SOP user guidance on the balance touchscreen. With automatic data handling, calculations and reports, balances powered by LabX easily fulfill the highest process security and traceability requirements and support your moves towards a paperless lab.
- Efficient and Secure Weighing: Direct weighing is accurate, fast, and fits any working situation thanks to the intelligently designed ErgoClips. For the fastest possible stabilization times, the MinWeigh door micro is essential.
- Easy and Safe Cleaning: Minimize the risk of cross contamination: each panel of both the inner and outer draft shield is easily removable, and cleaned in a flash!
General Specifications
There are no General Specifications available.
Series Modals
METTLER TOLEDO - XPE26
[+] View Model Specifications| Depth | 487 mm |
| Height | 322 mm |
| Plate Depth | 40 mm |
| Plate Width | 40 mm |
| Width | 263 mm |
| Linearity | 0.01 mg |
| Minimum Load | 1.4 mg |
| Repeatability | 0.0004 mg |
| Stabilization Time | 3.5 sec |
| Additional Model Specifications | Maximum Capacity 22 g Readability 1 µg |
METTLER TOLEDO - XPE26DR
[+] View Model Specifications| Depth | 487 mm |
| Height | 322 mm |
| Plate Depth | 40 mm |
| Plate Width | 40 mm |
| Width | 263 mm |
| Linearity | 0.01 mg |
| Minimum Load | 2.4 mg |
| Readability | 0.01 mg |
| Repeatability | 0.01 mg |
| Stabilization Time | 2.5 sec |
| Additional Model Specifications | Maximum Capacity 22 g/5.1 g |
METTLER TOLEDO - XPE56
[+] View Model Specifications| Depth | 487 mm |
| Height | 322 mm |
| Plate Depth | 40 mm |
| Plate Width | 40 mm |
| Width | 263 mm |
| Linearity | 0.02 mg |
| Minimum Load | 1.4 mg |
| Readability | 0.004 mg |
| Stabilization Time | 3.5 sec |
| Additional Model Specifications | Maximum Capacity 52 g Readability 1 µg |
METTLER TOLEDO - XPE56DR
[+] View Model Specifications| Depth | 487 mm |
| Height | 322 mm |
| Plate Depth | 40 mm |
| Plate Width | 40 mm |
| Width | 263 mm |
| Linearity | 0.03 mg |
| Minimum Load | 2.4 mg |
| Readability | 0.01 mg |
| Repeatability | 0.01 mg |
| Stabilization Time | 2.5 sec |
| Additional Model Specifications | Maximum Capacity 52 g/11 g |