Phase II - Digital Brinell Hardness Tester
Manufactured by Phase II
No Documents
Innovative closed-loop technology from Phase II. The tester incorporates the latest load cell technology. The test load...
Innovative closed-loop technology from Phase II. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
Active Questions & AnswersAsk a Question
There are no current Discussions
Hardness Testers Service ProvidersView All (2)
Documents & Manuals
There are no Documents or Manuals available.
Features of Digital Brinell Hardness Tester
General Specifications
There are no General Specifications available.
Additional Specifications
Loads
F3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)
Load dwell duration
2s-99s, can be set and stored
Tungsten Carbide Ball indenter
10mm, 5mm, 2.5mm
Measuring range
8HBW-650HBW
Magnification of the microscope
20X
Resolution capability of the microscope
0.005mm
Max measurable height
230 mm
Max measurable depth
140 mm
Dimensions
530mm x 260mm x 750mm
Power supply
220/110 V, 50/60 Hz, 4A
Weight
224lbs.