Phase II - Coating Thickness Gauge with Color Flip Display
Manufactured by Phase II
The PHASE II PTG-4000 coating thickness gauge can perform two different methods of calculating thickness measurement by...
The PHASE II PTG-4000 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.
The PHASE II PTG-4000 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.
Testing performance is both non-destructive and extremely accurate.
With this state of the art coating thickness gage, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing our auto-detect, integrated probe.
The PTG-4000 coating thickness gauge can be used in many areas of industry including automotive auctions, manufacturing, general engineering, commercial inspection, etc.
The PTG-4000 coating thickness gauge utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substrate samples (steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.
The PHASE II PTG-4000 coating thickness gauge can perform two different methods of calculating thickness measurement by utilizing the characteristics of both eddy current and magnetic induction.
Testing performance is both non-destructive and extremely accurate.
With this state of the art coating thickness gage, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magnetic conductive substrate (non-ferrous) utilizing our auto-detect, integrated probe.
The PTG-4000 coating thickness gauge can be used in many areas of industry including automotive auctions, manufacturing, general engineering, commercial inspection, etc.
The PTG-4000 coating thickness gauge utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substrate samples (steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & Manuals
There are no Documents or Manuals available.
Features
There are no Features available.
General Specifications
Depth | 29 mm |
Height | 100 mm |
Width | 52 mm |
Power Requirements | 2-AAA batteries |
Weight | 5 lbs |
Additional Specifications
Measuring range:
0-1,250 ï? m max. or 0-50 mils
Resolution:
1ï? m / 0.1mils
Accuracy:
+/- 3% + 2ï? m ( +/-3%+0.1 mil )
Display:
3 digit color LCD
Statistics:
Min/Max, Average, Std Deviation
Single or Continuous Measurement (Selectable)
Min. measuring area:
0.2� x 0.2� (5mm x 5mm)
Min. radius of curvature Convex:
0.12� (3mm)
Min. radius of curvature Concave:
1.2� (30mm)
Min. substrate thickness Ferrous:
20 mils (0.5mm)
Min. substrate thickness Non-ferrous:
2 mils (50 ï? m)
Max. Surface temperature of test object:
302 degrees F (contact time max is 2 seconds)