Features & Included Accessories 

• Load Cell driven system provides precise control of test force application * Direct digital reading * Engineered to obtain highly sensitive and accurate readings * Perfect for laboratories, workshops, tool rooms, inspection labs, etc. * Measuring Range: 3.18-650HBW   * Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations. * The gross weight of the tester is 50% less than the traditional dead weights type testers. * Test load selection by keypad and shown on the LCD screen. * Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, dwell, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated. * Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen. * The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen. * Equipped with a 20X optical microscope to measure the diameter of Brinell indention. * Brinell Hardness Calculator (BHC) makes the hardness value calculation easy and convenient.