Phase II - Portable Surface Roughness Gauge Profilometer

Manufactured by  Phase II
Follow this Equipment

The latest in state-of-the-art surface roughness testers profilometer, the SRG-4000 is designed with the shop environment in mind.

The newest addition to our state-of-the-art surface roughness testers /profilometers, the SRG-4600 will instill the highest level of confidence in your production, shop floor or QC lab. Extended memory and output coupled with many updated useful functions, the SRG-4600 surface roughness tester/profilometer is clearly the new leader in ultra accurate surface roughness/profile testing. These surface roughness testers/profilometers are distinguished by a high level of accuracy, multiple parameters and simplicity of operation. Extremely sensitive and highly accurate readings from this Phase II surface roughness tester/profilometer is offered via 9 popular surface roughness scales including Ra, Rq(Rms), Rt, Rz and Rmax. 
The new diamond stylus is hypersensitive and sophisticated enough to allow for a .001 (um) micron display resolution. The SRG-4600 surface roughness tester/profilometer can utilize an easy interface to allow for changes of in/mm (uin/um), cutoff length, sampling length, parameters, level of test(stylus position), digital filters and more! Surface roughness measurement results are displayed as large characters on the LCD screen for easy recognition. 
Battery powered portability allows the SRG-4600 surface roughness tester/profilometer to mobilize productivity throughout the shop.Further, a wireless Bluetooth auto-start comes standard with each unit.
Active Questions & AnswersAsk a Question

There are no current Discussions

Hardness Testers Service ProvidersView All (2)

Request Support
Documents & Manuals

There are no Documents or Manuals available.


There are no Features available.

General Specifications
Depth 65 mm
Height119 mm
Width 47 mm
Power Requirements Li-Ion rechargeable battery
Weight4440 g
Additional Specifications

Flat, Inside and Outside Diameters 
Measures grooves and recessions:  
wider than 0.16in (4mm) 
Roughness parameters: 
Ra, Rz, Rq (Rms), Rt, Rs, Rsm, Rmax, Rpc, Rmr. 
Roughness standards:  
Display resolutions:  
0.01µm/+/-20 µm 0.02µm/+/-40 µm 0.04µm/+/-80 µm 
Measuring accuracy:  
Less than or equal to 6% 
Measuring range: Ra, Rq:  
0.01-40µm Rz,Rt, Rm: 0.02-160µm 
Maximum drive range:  
Cut-off length:  
0.009/0.03/0.09inch (0.25/0.8/2.5mm) 
Tracing speeds:  
speed 1mm/s (sampling length 2.5mm) speed 0.5mm/s (sampling length 0.8mm), speed 0.135mm/s (sampling length 0.25mm 
Inductance type 
Diamond, radius 5µm 
Pick up Force:  
Data output:  
Operating temperature:  
41ºF-104ºF (5º-40ºC)

Looking for New or Used Equipment?

Shop on LabX

Shop on