1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Materials Testing Systems
    4.  / 
  4. Universal Testing Machines
    5.  / 
  5. Phase II - Ultrasonic Thickness Gauge wih A & B Scan

Phase II - Ultrasonic Thickness Gauge wih A & B Scan

Manufactured by  Phase II
Follow this Equipment

These new state of the art thickness gauges are packed with useful features allowing users to be confident of the displayed values

Utilizing color waveform A-scan and time based B-scan for absolute correctness, these new state of the art thickness gauges are packed with useful features allowing users to be confident of the displayed values on the most critical of applications. These multi-functional units offer everything from basic measurement, Scan mode with Min/Max viewing, GO/NO GO display, Adjustable Sound Velocity and Thru-Coating Capabilities. These dynamic sonic gauges are designed to measure the thickness of metallic and non-metallic materials in critical situations that ordinary thickness gauges couldn’t do. The Phase II UTG-4000 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity. 
 
Comes complete with 5MHz Probe, Couplant Gel, Certificate of Calibration, Operation Manual and Custom Carry Case.
Active Questions & AnswersAsk a Question

There are no current Discussions

Need Equipment Support?

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Ultrasonic Thickness Gauge wih A & B Scan
  • A-Scan Color Waveform * B-Scan * Adjustable Sound Velocity * Adjustable Gain * Adjustable Gate * Automatic V-Path Correction * Min/Max Settings w/Alarm * Blanking * Differential Mode
General Specifications
Depth 37 mm
Height153 mm
Width 76 mm
Weight280 g
Additional Specifications

Operating Principle Ultrasonic pulse/echo method with dual element probe 
 
Display type: 
2.4” Color Screen 
 
Display Resolution: 
0.01”/.001″/0.0001″ (selectable) 
 
Echo-Echo:  
0.118” – 2.35” 
 
Measuring Range:  
0.040-20.0” (10mm-145mm) Dependant upon probe & material 
 
Gain-Adjustable: 
8 – 55dB (higher the gain, the higher the sensitivity is) 
 
Repeatability: 
+/-.001” (+/-0.05mm) 
 
Sound velocity range: 
0.0197-0.3937in/us (500-9999m/s) 
 
Measuring Error: 
0.001”(up to 0.984”) 
0.007”(up to 3.03”) 
0.019”( 4” and above) 
 
Display Modes: 
Digital Thickness Readout 
A-scan, B-scan or Waveform 
Min/Max Capture 
D-Value / Reduction 
 
V-Path Correction Automatic 
 
Gate-Adjustable Gate ranges from 1-50mm (for A-scan only) 
 
Refresh Rate: 
4/second 
 
Operating Temp: 
14-122ºF (-10ºC – +50ºC) 
 
Auto Shut-Off After 5 minutes 
 
Power Supply: 
3v AA alkaline batteries (2pc) 
 
Operating Time: 
Approx. 36 hours

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com