AQUA SOLUTIONS - RODI-T2- Reverse Osmosis
Manufactured by AQUA SOLUTIONS
No Documents
RODI-T2 - Reverse Osmosis plus Type II DI System
The 10-LPH reverse osmosis portion of this system reduces operating costs by economically removing ~95% of the contaminants from the incoming tap water. The RO water is stored in an included 42-Liter pressurized tank that prevents the risk of airborne contamination and eliminates the need for additional feed pumps and tank filters.
The Type II DI portion of this system produces 2-15 megohm-cm (0.48-0.067 MicroSeimens/cm) water at a flow rate of 5 Liters/minute and and includes one installed High Capacity DI Module and one spare DI Module. It features continuous recirculation to maintain maximum water purity. Therefore, pure water is instantly available on demand. The system includes a single dispensing valve and can be setup to feed several dispensing points via a small (50 linear foot) circulation loop. A variety of optional faucets, valves, and dispensers are available for use with the system.
This affordable lab water system is simple to install and is easily maintained by the user. The system cabinet can be bench, shelf or wall mounted and the RO storage tank can be installed up to 20 feet from the system. An additional RO membrane can be added to the system to increase RO production and the storage tank can be upgraded to increase capacity. The system has a 2-year warranty in most countries, is proudly made in the USA
The Type II DI portion of this system produces 2-15 megohm-cm (0.48-0.067 MicroSeimens/cm) water at a flow rate of 5 Liters/minute and and includes one installed High Capacity DI Module and one spare DI Module. It features continuous recirculation to maintain maximum water purity. Therefore, pure water is instantly available on demand. The system includes a single dispensing valve and can be setup to feed several dispensing points via a small (50 linear foot) circulation loop. A variety of optional faucets, valves, and dispensers are available for use with the system.
This affordable lab water system is simple to install and is easily maintained by the user. The system cabinet can be bench, shelf or wall mounted and the RO storage tank can be installed up to 20 feet from the system. An additional RO membrane can be added to the system to increase RO production and the storage tank can be upgraded to increase capacity. The system has a 2-year warranty in most countries, is proudly made in the USA
Active Questions & AnswersAsk a Question
There are no current Discussions
Water Purification Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of RODI-T2- Reverse Osmosis
- Includes LCD readout conductivity monitor with flashing red LED alarm. * The System price includes two High Capacity purification modules: one installed and one spare. * Continuous recirculation is utilized to ensure water quality and prevent the growth of microorganisms within the system. * Built-in Reverse Osmosis pretreatment lowers operating cost by economically removing 95-98% of the contaminants from the tap water. * You can install the spare DI tank yourself, whenever you need it - even on weekends! * Certified by CSA for the US & Canada, CE marked for export to EU countries.
General Specifications
| Depth | 12 in |
| Height | 20 in |
| Width | 20 in |
| Power Requirements | 110V |
| Weight | 100 lbs |
Additional Specifications
Cabinet dimension Width - 20 in (508 mm), Depth - 12 in (305 mm) Height - 20 in (508 mm)
Mounting Bench, Shelf, or Wall (no additional charge)
Operating weight 75 - 100 lbs (34 - 45 kg) cabinet only
Input Power Requires a 110V outlet within 5 ft. of the purity sensor
System power source Switching power supply - 12 VDC at 2.5 Amps
Minimum Inlet Pressure 10 PSI (0.68 bar)
Maximum Inlet Pressure 100 PSI (6.8 bar)