1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Lab Pumps
    4.  / 
  4. Teledyne Isco - 100DX Syringe Pump

Teledyne Isco - 100DX Syringe Pump

Manufactured by  Teledyne Isco
Follow this Equipment

High Pressure Applications - up to 690 bar (10,000 psi)

The 100DX was developed initially to meet the demand for a 690 bar (10,000 psi) pump with fast flow and refill for Supercritical Fluid Extraction. It has also found many other applications for jobs requiring the combination of high pressure and flow rate up to 50 mL/minute. For the ultimate low-flow precision, we recommend the 65DM model, which has the same pressure rating but is geared for maximum flow of 30 mL/minute and triple the displacement resolution of the 100DX.  
 
Dual-pump 100DX systems are available with a choice of valve packages for non-stop continuous flow.
Active Questions & AnswersAsk a Question

There are no current Discussions

Lab Pumps Service ProvidersView All (3)

Request Support
Features of 100DX Syringe Pump
  • 100DX pump has 1/8" Valco fittings for secure high-pressure connections.    
  • Integral button-style pressure transducer in cylinder cap assures excellent stability and repeatability.    
  • Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance.    
  • Each Isco D-Series syringe pump is bench tested at the factory.    
  • Exclusive "Smart Key" controller. All Isco D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:       Single pump independent constant flow or pressure     Single pump flow - or pressure - ramp programming     Single pump dispensing     Dual pump continuous constant flow or pressure     Dual pump concentration gradients     Three-pump configured systems    
  • RS-232/485 serial interface for computer control or monitoring of operating parameters.    
  • Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits.    
  • Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance.    
  • Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.
    • General Specifications

    There are no General Specifications available.

    Additional Specifications

    ?Capacity: 103 mL 
    ?Flow Range: ?0.01 µL/min to 50 mL/min 
    ?Flow Accuracy: ?0.3% of setpoint 
    ?Displacement Resolution: ?9.6 nL 
    ?Pressure Range: 0.7 to ?689.5 bar (10 to 10,000 psi) 
    ?Standard Pressure Accuracy: ?0.5% Full Scale 
    ?Optional Pressure Accuracy: ?0.1% Full Scale 
    ?Wetted Materials: ?Nitronic 50, PTFE, Hastelloy C-276 
    ?Plumbing Ports: ?1/8" Valco 
    ?Operating Temperature: 5 to 40 °C Ambient 
    ?Power Requirements: ?100 VAC, 117 VAC, 234 VAC, 50/60 Hz 
    ?Dimensions (H x W x D): ?101 x 27 x 47 cm (39.8 x 10.7 x 18.4 inch) 
    ?Weight: ?Pump - 32.8 kg (72.3 lb) 
    Controller - 3.0 kg (6.5 lb)

    Looking for New or Used Equipment?

    Shop on LabX

    Shop on Labx.com