1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Lab Pumps
    4.  / 
  4. Teledyne Isco - 65DM Syringe Pump

Teledyne Isco - 65DM Syringe Pump

Manufactured by  Teledyne Isco
Follow this Equipment

The new 65DM is an excellent pump for high pressures or very low flow...

The new 65DM is an excellent pump for high pressures or very low flow rates.
Active Questions & AnswersAsk a Question

There are no current Discussions

Lab Pumps Service ProvidersView All (3)

Request Support
Features of 65DM Syringe Pump
  • 65DM pump has 1/8" Valco fittings for secure high-pressure connections.    
  • Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance.    
  • Each Isco D-Series syringe pump is bench tested at the factory.    
  • Exclusive "Smart Key" controller. All Isco D-series pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:       Single pump independent constant flow or pressure   Single pump flow - or pressure - ramp programming   Single pump dispensing  Dual pump continuous constant flow or pressure  Dual pump concentration gradients  Four-pump configured system    
  • RS-232/485 serial interface for computer control or monitoring of operating parameters.    
  • Redundant safety is designed in. All D-Series pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits.    
  • Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance.    
  • Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.
    • General Specifications

    There are no General Specifications available.

    Additional Specifications

    Capacity: ?68 mL 
    ?Flow Range: 0.01 µL/min to 30 mL/min  
    ?Flow Accuracy: ?± 0.3% of setpoint 
    ?Displacement Resolution: 2.55 nL/step 
    ?Pressure Range: 0.7 to 689 bar (?10 to 10,000 psi) 
    ?Standard Pressure Accuracy: ?0.5% Full Scale 
    ?Optional Pressure Accuracy: ?0.1% Full Scale 
    ?Wetted Materials: ?Nitronic 50, PTFE, Hastelloy C-276 
    ?Plumbing Ports: ?1/8" Valco 
    ?Operating Temperature: 5 to 40 °C Ambient 
    ?Power Requirements: ??100 VAC, 117 VAC, 234 VAC, 50/60 Hz 
    ?Dimenions (H x W x D): 103 x 27 x 47 cm (40.6 x 10.7 x 18.4") 
    ?Weight: ??Pump - 33.2 kg (73.2 lb) 
    Controller - 3.0 kg (6.5 lb)

    Looking for New or Used Equipment?

    Shop on LabX

    Shop on Labx.com