Teledyne Isco - 260HP High Pressure Syringe Pump
Manufactured by Teledyne Isco
High pressure core flooding and PVT analysis
The 260HP syringe pump provides precise, predictable flow and pressure control at flow rates from sub-microliter to 107 mL/min. Exceptional low-flow stability at up to 655 bar (9,500 psi) makes this the ideal pump for high pressure applications from deep well core analysis to multi-dimensional capillary LC using small-bore packed capillary columns.
The D-series controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable lets you locate the controller up to 15 meters (50 feet) from the pump.
The 260HP pump module has a single-ratio drive train with auto-lubricating gears for long life and low maintenance. Special fittings are used to prevent leaks and ensure safety at maximum pressure.
Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes.
The D-series controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable lets you locate the controller up to 15 meters (50 feet) from the pump.
The 260HP pump module has a single-ratio drive train with auto-lubricating gears for long life and low maintenance. Special fittings are used to prevent leaks and ensure safety at maximum pressure.
Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes.
Active Questions & AnswersAsk a Question
There are no current Discussions
Lab Pumps Service ProvidersView All (3)
Documents & ManualsView All Documents
Features of 260HP High Pressure Syringe Pump
Applications
High-pressure experiments requiring precision control
Proteomics research using nanobore capillary packed columns
Rock core analyses for hydrocarbon recovery studies in deep-well reservoirs
Chemical/reactant feed in chemical process development, catalyst evaluation, plastic formation
Options and Accessories
Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
High-accuracy pressure transducers (0.1% linear accuracy)
Drivers for LabVIEW - National Instruments
General Specifications
There are no General Specifications available.
Additional Specifications
Capacity: 266 mL
?Flow Range: ??0.001 - 107 mL/min
?Flow Accuracy: ?± 0.5% of setpoint (Maximum 0.50 µL/min seal leakage)
??Pressure Range: ?10 - 9,500 psi (0.7 - 655 bar)
?Plumbing Ports: ?1/8" Valco
??Dimensions: ??101 cm x 27 cm x 47 cm (39.8" x 10.7" x 18.4")