Anton Paar - EasyDens
Manufactured by Anton Paar
No Documents
EasyDens determines your wort's extract content, the sugar content in your home-produced fruit juices and the alcohol content in spirits with no sugar
Active Questions & AnswersAsk a Question
There are no current Discussions
Bulk Density Tester Service ProvidersView All (9)
Documents & Manuals
There are no Documents or Manuals available.
Features of EasyDens
EasyDens is true to its name
Reports give the measured results for density, SG (relative density) and one concentration unit of your choice (extract in % w/w, alcohol in % v/v or sugar content in °Brix)
The two other concentration units are available via in-app purchase at any time
Concentration values are already temperature-corrected, so you need no further calculations or correction tables
Covers the entire measuring range needed for production of your homemade product
Measurements are done in less than a minute, including filling and cleaning
App for download on smartphones with operating system Android 4.3 and higher or or iOS 7.0 and higher.
Data exchange between EasyDens and your Smartphone via Bluetooth Low Energy
Keep your homemade product under control[/b)
EasyDens helps you to ensure that your homemade product ends up the way you intended
It monitors the fermentation of your handcrafted beverage and visualizes the process in a fermentation chart
Measurement data can be saved and exported from the EasyDens app to further process them on your computer
For homebrewers: the alcohol content is calculated from the measured extract/specific gravity results and is shown in the automatically created chart
Enhance your production skills by learning about the influences of your raw materials and production process on the measured results
Get the maximum drinkable volume – only a small amount of sample is needed for testing
Straightforward measuring procedure
Samples containing CO2 and big particles need to be filtered before filling the measuring cell
A few milliliters of sample are filled into the measuring cell by syringe
The measured results are displayed on your smartphone moments later
Robust and maintenance-free design
Robust design ensures a long-term working relationship
Clean, calibrate and re-adjust EasyDens yourself, with some deionized water
EasyDens is based on the renowned oscillating U-tube principle.
General Specifications
| Depth | 80 mm |
| Height | 35 mm |
| Width | 120 mm |
| Power Requirements | Two 1.5 V LR6 AA alkaline batteries or two AA NiMH rechargeable batteries |
| Weight | 200 g Inc. batteries |
Additional Specifications
Extract:
–10 %w/w to 40 %w/w
Sugar:
–10 °Brix to 80 °Brix
Alcohol:
0 %v/v to 100 %v/v
Temperature:
5 °C to 30 °C / 41 °F to 86 °F
Accuracy
Extract:
0.3 %w/w
Sugar:
0.3 °Brix
Alcohol:
0.5 %v/v
Temperature:
0.2 °C / 0.4 °F
Resolution
Extract / Sugar / Alcohol:
0.1 %w/w / °Brix / %v/v
Temperature:
0.1 °C / 0.1 °F
Sample volume
approx. 2 mL
Ambient temperature
5 °C to 35 °C / 41 °F to 95 °F
Storage temperature
5 °C to 35 °C / 41 °F to 95 °F
Humidity
5 % to 90 % relative air humidity, non-condensing
Interface
Bluetooth Low Energy