1. Home
    2.  / 
  2. Analytical
    3.  / 
  3. Polarimeters
    4.  / 
  4. Rudolph Research Analytical - Autopol VII

Rudolph Research Analytical - Autopol VII

Manufactured by  Rudolph Research Analytical
Follow this Equipment

High Accuracy Polarimeter with Industry Leading Automated Sample Loading.

High Accuracy Polarimeter with Industry Leading Automated Sample Loading 
The Industry Standard Polarimeter 
The Autopol® VII combines a pharmaceutical level Polarimeter with fully automated sample loading capability, a perfect answer for high throughput labs that demand accuracy and, reproducibility, combined with versatile sample loading, cell cleaning, rinsing, and drying. 
 
The Autopol® VII has the validation tools, features, and reputation to satisfy today’s global pharmaceutical companies, including: instrument level 21CFR Part 11 compliance, NIST traceable validation and a global list of satisfied customers who praise the Autopol’s® quality, accuracy and reproducibility. 
 
The Autopol® VII offers Automated NIST Traceable 3 point validation combined with fully Automatic TempTrolTM Temperature Control 
The Autopol® VII has built-in NIST Traceable Quartz plates to automatically perform a 3 rotation validation on the Autopol VII. To validate the instrument simply press a button to begin the validation routine. Using the on-board quartz plate standards the instrument will perform and record the results of a full 3 point calibration at all wavelengths at the correct temperature.
Active Questions & AnswersAsk a Question

There are no current Discussions

Polarimeters Service ProvidersView All (3)

Request Support
Documents & Manuals

There are no Documents or Manuals available.

Features of Autopol VII
Automated filling, cleaning, and rinsing    The Autopol VII with integrated sample loading  can be configured to automate a wide range of sample viscosities. Perfect for high throughput laboratories looking to increase productivity. By automating sample loading user time is saved. The method ensures samples are loaded properly and the correct cleaning and rinsing sequence is performed. The Autopol® VII with integrated automated sample loading is ideal for busy Pharmaceutical laboratories where sample  handling is discouraged.    Sample Viscosity:    • Samples up to 36,000 mPa-s (cP)    • Sample Volume Requirements: 3.5ml typical, optional to 1.5ml    Rack Sample Capacity:    • 50 – 16 x 100mm Test tubes. 70 – 13 x 100 mm, or   optionally dozens of sample vial configurations and  capacities.    Cleaning Cycle:    • 1:45 minutes nominal – Time varies by application    • Full Measurement and Cleaning Cycle: 2:30 minutes nominal – Time varies by application
General Specifications

There are no General Specifications available.

Additional Specifications

Measuring Mode:  
Optical Rotation, Specific Rotation, Concentration & User-defined Scales 
Measuring Scale: 
Degrees Arc, % Concentration 
Measuring Range:  
±89.9° Arc Optical Rotation, ±999.99° Arc Specific Rotation and 0-99.9% Concentration 
Resolution:  
0.001° Arc Optical Rotation, 0.001% Concentration, 0.001° Specific Rotation 
Reproducibility:  
0.002° Arc 
Standard Model Accuracy:  
0.002° up to 1°, 0.2% up to 5°, 0.01° above 5° 
AP Model Accuracy:  
(546nm and 589nm): ±0.002° Arc over ±89.9°?Arc. Accuracy for other wavelengths is the same as the standard model. 
Prism:  
Glan Thompson calcite quartz 
Optical Wavelengths:  
365nm, 405nm, 436nm, 546nm, 589nm, 633nm (other wavelengths available) 
Wavelength Selection:  
Automatic by push-button 
TempTrol™ Range:  
Automatic Electronic Heating & Cooling 15°-35°C 
TempTrol™ Accuracy:  
±0.2°C 
Temp. Probe Range:  
10°-40°C 
Temp. Probe Accuracy:  
±0.1°C 
Acid Resistance:  
Hastelloy™ measurement cell and Silco Steel™ sample chamber (optional) 
Measurement Time:  
4°/sec. slew rate and 5 sec. nominal settling time 
Light Source:  
Tungsten-halogen 6V, 20W, avg. 2,000 hour life 
Sample Chamber:  
Accepts sample tubes up to 200mm 
Data Storage/Internal Memory:  
Multimedia Card and/or Secure Digital Card 
Communication Interface:  
Two RS232 serial ports, one parallel printer port and one auxiliary port 
Calibration:  
Automatic calibration by push-button 
Display:  
7.5cm x 10cm graphics LCD, 320 x 240 dots cold fluorescent back lit 
User Interface:  
Touchscreen 
Automatic Sensitivity Control:  
Measures samples with transmittance as low as 0.01% (up to O.D. 4.0) 
Input Power:  
100-240VAC, 50/60 Hz 
Operating Dimensions:  
35”W x 10.5”H x 17”D 890mm W x 267mm H x 432mm D 
Shipping Dimensions:  
43”W x 26”H x 23”D 1,025mm W x 625mm H x 625mm D 
Operating Weight:  
85 lbs. (39kg) 
Shipping Weight:  
115 lbs. (52kg)

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com