Labconco - FlaskScrubber Glassware Washer

Manufactured by  Labconco
Follow this Equipment

FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware.

FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out.    
   
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byDucky1

Standard Capacity Washers Service ProvidersView All (7)

Request Support
Features of FlaskScrubber Glassware Washer
  • 18 glassware holders, 36 clips and 10 additional interchangeable small spindles      

  • LCD information center for customizing cycles and monitoring operation, including internal water temperature (° C or ° F)      

  • Water recirculation rates of 96 gal/min (363 liters/min) when operated on 115 Volt, 60 Hz and 230 Volt, 50 Hz and 112 gal/min (424 liters/min) on 230 Volt, 60 Hz for thorough cleaning      

  • Dual pumps, one for washing and one for draining, to reduce potential for cross contamination      

  • Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses      

  • Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware      

  • Manual-fill detergent dispenser for powder or liquid detergent    

  • Manual-fill rinse aid solution dispenser      

  • Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH and OVERFLOW    

  • Two user-set cycle programs      

  • User-set delayed start (up to 8 hours)     

  • Type 304, brushed stainless steel door, tank, upper and lower wash arms. Free standing models also have stainless steel exterior sides and top.     

  • One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps      

  • 3/8" Female NPT inlet fitting for hot tap water connection    

  • Factory-installed drain hose and band clamp     

  • Two year warranty on parts and labor      

  • Accommodate optional Upper Spindle Rack with additional wash arm and side release latches (Upper Spindle Rack sold separately).    

  • Accommodate optional Upper and Lower Standard Racks.

General Specifications

There are no General Specifications available.

Series Modals

Labconco - Freestanding 115 V Model 4420420

[+] View Model Specifications

Labconco - Freestanding 230 V Model 4420421

[+] View Model Specifications

Labconco - Undercounter 115 V Model 4578120

[+] View Model Specifications

Labconco - Undercounter 230 V Model 4578121

[+] View Model Specifications
Videos
  • Programming a Labconco Glassware Washer

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com