Miele - G7883CD
The Miele G 7883 CD is the "Industry Standard Plus."
Active Questions & AnswersAsk a Question
Rinse Water
G7883 error "F26" Manual de service?
The drainage is not working
Standard Capacity Washers Service ProvidersView All (7)
Documents & ManualsView All Documents
Features of G7883CD
4-fold filter system with flat filter, coarse filter, glass shard filter and micro-fine filter
Double skinned construction with insulation for low noise emissions
Flow meter counter for control of water intake
Electric door lock
Program failure check
Visual and audible signal at program end
2 spare sensors for temperature monitoring and control
Sensor port for easy positioning of probes in wash cabinet for validation
General Specifications
Depth | 27.5 in |
Flow Rate | 10.5 L/min |
Height | 33.5 in |
Internal Depth | 20.5 in |
Internal Height | 18.5 in |
Width | 35.5 in |
Feed Water Pressure | 25-60 PSI |
Internal Width | 20.5 in |
Maximum Temperature | 93 °C |
Power Requirements | 208 / 220V, 60Hz, |
Noise Level | 54 dB |
Recirculation Pump (flow rate) | 106 gallons per minute (400 l per minute) |
Construction | 304 Stainless Steel Interior |
Drying System | Forced Air |
Washer Capacity | Standard Capacity |
Washer Orientation | Undercounter |
Additional Specifications
Programs:
Standard: 8 standard wash routines. Holding times, and temperatures are adjustable.
Custom: One custom program slot
Cleaning Mechanisms:
Rotary: Dual spray arms located at the top, and bottom of chamber
Direct: Injection Upper, lower, or dual level injection baskets available
Water Softener: Built-in softener with adjustable water hardness control
Steam Condenser: Included. No external venting is required.