Lancer - 1400 LXP Freestanding Washer Dryer

Manufactured by  Lancer
Follow this Equipment

Freestanding Glassware Washer Dryer

The Lancer 1400 LXP Freestanding Glassware Washer dryer has a wide chamber and 3 levels with a choice of positions at the upper levels. This enables washing and drying high volumes of glassware – whether lots of similar items or mixed loads of various types and sizes. Suitable for either high throughput labs or centralized washing facilities serving many labs, several 1400 LXP models provide a continual bulk cleaning process. The 1400 LXP offers adjustable drying in 1ºC increments. Additional options for the 1400 LXP include: validation monitor, flowmeter, extra dosing pumps and a conductivity meter, making it suitable for labs involved in pharma processing but where full GMP specifications are not required.        
   
Active Questions & AnswersAsk a Question

Recent Questions & Answers

Large Capacity Washers Service ProvidersView All (7)

Request Support
Features of 1400 LXP Freestanding Washer Dryer

Key features of 1400 LXP:     

  • Larger and wider chamber for greater capacity and volume with three levels of cleaning        

  • More robust control system allowing for great washer functionality       

  • Optional independent monitoring system      

  • Powerful and rapid HEPA filtered drying through injectors and in wash chamber      

  • Increased safety with on-board storage and input of chemicals      

  • Higher grade 316 L Stainless Steel Chamber        

All Lancer washers feature these key benefits:        

  • Fast cycles and outstanding results from powerful wash action and design       

  • Easy to use microprocessor controls with self-diagnostic software and alarms       

  • Flexibility of multi-level injection washing and interchangeable racks       

  • All sizes and types of glassware cleaned with chamber configuration choices        

  • Ergonomic and safe loading of racks on load bearing telescopic runners        

  • Choice of preset and user-customized (PIN code protected) programs      

  • Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps        

  • Cost effective – low life cycle costs and efficient operation uses less resources and inventory        

  • Eco-friendly low energy, chemicals and water usage

General Specifications
Depth 32.7 in
Flow Rate25 L/min
Height68 in
Internal Depth 24.4 in
Internal Height 30.3 in
Width 31 in
Feed Water Pressure29-87 psig
Internal Width 24.4 in
Power Requirements 13.5 kw
Heat Loss4,760 Btu / 1,395 watts - per hour
Noise Level65 dB
Weight470 lbs
Recirculation Pump (flow rate)20-25 L/min (5.2-6.6 gal/min)
Wash/Rinse Cycles4 pre-programmed, 36 user-defined cycles
Water Consumption20 to 25 L / 5.2 to 6.6 gal - per fill
Drying SystemForced Air
Washer CapacityLarge Capacity
Additional Specifications

Loading Height: 674 mm / 26.5 in        
Wash chamber load area: 3 Wash Levels - 524 square inches per level, 1,572 square inches total 3 levels        
Injection Cleaning: 1 to 3 levels with 4 possible rack positions        
Chemical Storage: Front access drawer        
Water Supply (Cold, Hot, DI):   

NewsView All Articles

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com