Lancer - 1800 LXA Freestanding Washer Dryer

Manufactured by  Lancer
Follow this Equipment

Freestanding Glassware Washer Dryer

Capable of cleaning a large volume of glassware, the 1800 LXA provides increased workflow and output. You can load 6 independent racks on a choice of 8 levels as a result of its innovative design. The Lancer 1800 LXA Freestanding Glassware Washer dryer is typically found in large centralised facilities or in laboratories with large non-standard sized items. Thousands of glassware items a day presents no problem for the 1800 LXA chamber that can wash and dry on 6 levels simultaneously. Racks are interchangeable between any of the 6 levels allowing many loading options. It is also ideal for very large vessels - 20 to 100 litres (5 - 26 gallons).
Active Questions & AnswersAsk a Question

There are no current Discussions

Large Capacity Washers Service ProvidersView All (7)

Request Support
Features of 1800 LXA Freestanding Washer Dryer

Key features of 1800 LXA: 

  • Maximizes usable space with sliding vertical door and chamber  

  • High Volume - double sets of racks loaded side by side  

  • Fast turn around - powerful injector HEPA filtered drying with twin turbines  

  • Powerful and rapid HEPA filtered drying through injectors and in wash chamber  

  • Visual check on progress of wash cycle enabled through glass door  

  • Reduces inventory - uses same racks/baskets as 800-1300 LX models  

All Lancer washers feature these key benefits:  

  • Fast cycles and outstanding results from powerful wash action and design  

  • Easy to use microprocessor controls with self-diagnostic software and alarms  

  • Flexibility of multi-level injection washing and interchangeable racks  

  • All sizes and types of glassware cleaned with chamber configuration choices  

  • Ergonomic and safe loading of racks on load bearing telescopic runners  

  • Choice of preset and user-customized (PIN code protected) programs 

  • Accurate and repeated intake of cleaning chemicals by automatic peristaltic dosing pumps  

  • Cost effective – low life cycle costs and efficient operation uses less resources and inventory  

  • Eco-friendly low energy, chemicals and water usage

General Specifications
Depth 33.1 in
Flow Rate25 L/min
Height78 in
Internal Depth 20 in
Internal Height 30.3 in
Width 55 in
Feed Water Pressure29-87 psig
Internal Width 41.9 in
Maximum Temperature95 °C
Power Requirements 208 V-3 Ph, 230 V-3 Ph, 480 V-3 Ph, 21 kW
Heat Loss4,760 Btu/hr (1200 Kcal/hr)
Noise Level65 dB
Weight805 lbs
Recirculation Pump (flow rate)2 pumps at 159 gal/min (600 L/min)
Wash/Rinse Cycles4 pre-programmed, 36 user defined cycles
Water Consumption9.25-12.42 gal (35-47 L)
Drying SystemForced Air
Washer CapacityLarge Capacity
Additional Specifications

Wash Levels: 1 to 6 with upper level height adjustable (8 positions)  
Water Supply (Cold, Hot, DI) Connection: 3/4 inch hose thread  
Injection Cleaning: 1 to 6 levels with 8 possible rack positions  
Chemical Storage: Front access drawer

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com