Labconco - Protector XL Floor-Mounted

Manufactured by Labconco

Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of...

Protector XL Floor-Mounted (Walk-In) Laboratory Hoods have panel liners that may be constructed of a variety of corrosion-resistant materials and supplied in three depths to meet individual installation and application requirements.

They are suitable for general chemistry applications and accommodate oversized apparatus. Widths of up to 16 feet are offered.

Active Questions & AnswersAsk a Question

There are no current Discussions

Fume Hoods Service ProvidersView All (9)

Request Support

Manuals & DocumentsFeaturesSpecifications

Documents & ManualsView All Documents

Features of Protector XL Floor-Mounted

Features

By-pass airflow design
Dry powder, glacier white epoxy-coated steel exterior
Chemical-resistant molded composite panel liner and adjustable upper and lower baffles with flame spread less than 25 per ASTM E-84
Removable front and side panels and exterior and interior service access panels for access to plumbing and electrical wiring
Pre-wired instant-start T8 fluorescent lighting, light and blower switches for 115 volt, 60 Hz operation
Two 3/16" thick tempered safety glass vertical-rising sashes framed with PVC (4', 5' and 6' models) or epoxy-coated aluminum (8' models)
Four 3/16" thick tempered safety glass horizontal-sliding sashes with epoxy-coated aluminum frames and sash tracks (8', 10', 12', 16' models)
Factory prepared for up to eight service fixtures including two gooseneck faucets
Factory prepared for up to four electrical duplex receptacles
Shipped in multiple sections, top and bottom
Epoxy-coated, stainless steel 12.81" ID exhaust connection(s)
ETL listed

Options

4', 5', 6', 8', 10’, 12’, 16’ widths
Interior depths of 30”, 36” and 48”

Required Accessories

Remote blowers
Ductwork

General Specifications

There are no General Specifications available.

Additional Specifications

Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805
Product Subcategory: General Chemistry
Nominal Width: 4'
Electrical Requirements: Domestic
Blower Requirements: Remote blower required
Service Fixtures: 2
Electrical Duplexes: 1
Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 680 CFM at 0.16" H2O static pressure
Style: Floor-Mounted

Series Modals

Labconco - 10' Protector XL

[+] View Model Specifications

Labconco - 12' Protector XL

[+] View Model Specifications

Labconco - 16' Protector XL

[+] View Model Specifications

Labconco - 4' Protector XL

[+] View Model Specifications

Labconco - 5' Protector XL

[+] View Model Specifications

Labconco - 6' Protector XL

[+] View Model Specifications

Labconco - 8' Protector with two sashes

[+] View Model Specifications

Labconco - 8' Protector XL with four sashes

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com

Airflow (CFM)	1360 CFM
Height	95 in
Width	120 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 8' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 1360 CFM at 0.12" H2O static pressure Depth: 9700901: 39.2" 9700903: 45.2" 9700905: 57.2"

Airflow (CFM)	1660 CFM
Height	95 in
Width	144 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 12' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 1660 CFM at 0.15" H2O static pressure Depth: 9701001: 39.2" 9701003: 45.2" 9701005: 57.2"

Height	96 in
Width	192 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 16' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 2260 CFM at 0.10" H2O static pressure Depth: 9716001: 39.2" 9716003: 45.2" 9716005: 57.2"

Airflow (CFM)	600 CFM
Height	95 in
Width	48 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 4' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 680 CFM at 0.16" H2O static pressure Depth: 9860401: 39.2" 9860403: 45.2" 9860405: 57.2"

Airflow (CFM)	900 CFM
Height	95 in
Width	60 in
Power Requirements	115 V, 60 Hz
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 5' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 900 CFM at 0.24" H2O static pressure Depth: 9860501: 39.2" 9860503: 45.2" 9860505: 57.2"

Airflow (CFM)	1120 CFM
Height	95 in
Width	72 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 6' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 1120 CFM at 0.28" H2O static pressure Depth: 9860601: 39.2" 9860603: 45.2" 9860605: 57.2"

Airflow (CFM)	1560 CFM
Height	95 in
Width	96 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 8' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 1560 CFM at 0.19" H2O static pressure Depth: 9700807: 39.2" 9700809: 45.2" 9700811: 57.2"

Airflow (CFM)	2200 CFM
Height	95 in
Width	96 in
Power Requirements	115 V, 60 Hz, Domestic
Lighting	T8 fluorescent
Face Velocity (FPM)	100
Fume Hood Type	Free-Standing Ductless
Additional Model Specifications	Product Subcategory: General Chemistry Nominal Width: 8' Blower Requirements: Remote blower required Service Fixtures: 2 Electrical Duplexes: 1 Compliance: SEFA 1-2002, NFPA 45-2000, ASTM E84-01, ASHRAE 110-95, ANSI Z9.5-1993, UL 3101-1/61010-1, CAN/CSA C22.2 No. 1010.1, UL 1805 Air Usage/Static Pressure with Sash 50% Open: At 100 fpm, exhausts 2200 CFM at 0.30" H2O static pressure Depth: 9700801: 39.2" 9700803: 45.2" 9700805: 57.2"