VELP Scientifica - Dumas Nitrogen Analyzer - NDA 701
A powerful Dumas Protein/Nitrogen Analyzer, able to perform precise nitrogen analysis and protein determination in a flash.
Active Questions & AnswersAsk a Question
There are no current Discussions
Elemental Analyzers Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of Dumas Nitrogen Analyzer - NDA 701
Exceptional Versatility Preinstalled methods selectable in an instant Controllable from PC with DUMAsoft™ software Powerful, clear and detailed reporting software Data storable in multiple formats for LIMS or PC
High Productivity Flash determination of nitrogen & protein content Automated analysis of preloaded samples (117 positions) Totally unsupervised operation Results produced 24/7/365
High Performance Unmatched LOD, 0.003 mg N RSD less than 0.5% with EDTA standard Conforms to Good Laboratory Practice standard Leak tests (zone or total) ensure optimum performance
Economical Operation LoGas™ TCD with no reference gas required Exceptionally low cost per analysis Premium quality consumables Low energy consumption Lowest operator costs
Environmentally Friendly Minimum possible waste & residues Optimized life of consumables Incorporates TEMS™ technology*
Dumas Nitrogen Analyzer - Full Automation & Convenience
VELP Scientifica has designed convenience into the NDA 701 Dumas Nitrogen Analyzer to let the user concentrate on evaluating the results that are produced in just 3 to 4 minutes per sample. Once up to 4 discs (30 positions each) have been loaded, press the start button and walk away. With the best limit of detection on the market and an RSD lower than 0.5% for EDTA, the user is assured of high precision results.
NDA 701, the ideal solution for high throughput, being fully automated and able to run 24/7.
Dumas Nitrogen Analyzer - NDA 701 Working Process
The Dumas method starts with a combustion to burn the sample, obtaining elemental compounds. Water is removed by a first physical trap (DriStep™), positioned after the combustion, and a second chemical one. Between the two, the elemental substances passed through a reduction furnace. The auto-regenerative CO2 adsorbers let pass only the elemental nitrogen that is detected by the LoGas™ innovative Thermal Conductivity Detector (TCD) with no requirement for a reference gas.
Dumas Nitrogen Analyzer - DUMASoft™, Simple Data Management
All the information will be constantly monitored from the main screen, including the real time graph. A wide library of methods is pre-installed to support the user with valuable information on the analysis. It's also possible to create a library of the calibration curves, in order to be always ready to use the most suitable one.
At any time, a leak test can be performed, to check that the system is completely sealed and no gases comes out. After the analysis, the user can create customized test report, with lots of information about the lab and its own logo.
General Specifications
There are no General Specifications available.
Additional Specifications
GENERAL FEATURES
Method of analysis: Nitrogen determination according to Dumas method (combustion)
Duration of analysis: 3/4 minutes
Detector: Innovative TCD autocalibrating
Sample weight: max 1g
Autosampler capacity: up to 4 discs, 30 positions each
Reproducibility (RSD): 99.5%
Detection limit: 0.003 mg nitrogen
Helium (He): purity 99.999% (grade 5.0)
Oxygen (O2): purity 99.999% (grade 5.0)
Compressed air or Nitrogen (N2): purity 99.6 % (oil and water free)
Helium (He) pressure: 2 bar
Oxygen (O2) pressure: 2 bar
Interfaces: USB; RS232
Power: 1400 W
Power supply: 230 V / 50 - 60 Hz
Weight: 54 kg / 119 lb
Dimensions (WxHxD): 655x510x410 mm (H 690 mm with autosampler)
25.8x20.1x16.1 in (H 27.0 in with autosampler)