BINDER - ED Series - Classic.Line

Manufactured by  BINDER
Follow this Equipment

Drying Ovens from the APT.Line - Drying oven with natural convection

Routine drying and sterilization applications up to 300 °C (572 °F) and storage at precisely controlled elevated temperatures are the strengths of ED drying ovens. Because of the natural convection with a high rate of air exchange, thermal processes run with significantly increased efficiency.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byrbwalter

Lab Ovens Service ProvidersView All (15)

Request Support
Features of ED Series - Classic.Line
  • Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
  • Temperature range 5 °C (9 ºF) above ambient temperature up to 300 °C (572 °F)
  • Digital temperature setting with an accuracy of one degree
  • DS controller with integrated timer 0 to 99 h
  • Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
  • Adjustable front ventilation flap slide and rear exhaust ø 50 mm (1.97 inch)
  • With or without RS 422 Interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • Units up to 115 liters are stackable
  • 2 chrome-plated racks included
  • BINDER test certificate
General Specifications

There are no General Specifications available.

Additional Specifications

[u]Exterior dimensions[/u]
Depth plus door handle and exhaust duct (mm/inch): 90 / 3.5
Wall clearance rear (mm/inch): 100 / 3.9
Wall clearance side (mm/inch): 100 / 3.9
Exhaust duct outer-Ø (mm/inch): 52 / 2.1
Number of doors: 1
Racks, chrome-plated: 2 standard, 3 maximum
Load per rack: 26 lbs
Permitted total load: 55 lbs

[u]Temperature data[/u]
Temperature variation
- at 70 °C: 1 ±5°C
- at 150 °C: 2 ±5°C
- at 300 °C: 3 ±8°C
Temperature fluctuation at 70°C: ±0.3°C
Heating up time:
- to 70 °C: 13 min.
- to 150 °C: 24 min.
- to 250 °C: 35 min.
Recov. time after door was opened for 30 sec.: 2)
- at 70 °C: 2.5 min.
- at 150 °C: 5 min.
- at 300 °C: 8 min.

[u]Air change[/u]
- at 70°C (x/h): 10
- at 150°C (x/h): 13
- at 300°C (x/h): 17

[u]Electrical data[/u]
Housing protection acc. to EN 60529: IP 20
Energy consumption
- at 70 °C (158 °F): 43 W
- at 150 °C (302 °F): 148 W
- at 300 °C (572 °F): 450 W

Series Modals

BINDER - ED 23

[+] View Model Specifications

BINDER - ED 240

[+] View Model Specifications

BINDER - ED 400

[+] View Model Specifications

BINDER - ED 53

[+] View Model Specifications

BINDER - ED 720

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com