AQUA SOLUTIONS - Type II DI Standard Flow
Manufactured by AQUA SOLUTIONS
Type II Reagent Grade Standard Flow Systems
AQUA SOLUTIONS' Type II DI Systems are available in Single and Dual module versions for low and medium flow applications that require Type II DI water. All AQUA SOLUTIONS' Type II laboratory water purification Systems produce purified water that exceeds ASTM, CAP and NCCLS specifications for Type II reagent grade water.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Type II Reagent Grade systems are also available as high-flow, high-capacity systems for glassware washer and other high-flow applications. Low Flow systems should be considered for point-of-use applications and low flow (3-6 liters/min) glassware washers.
Active Questions & AnswersAsk a Question
1Replies
pressure regulators
Recent Questions & Answers
Updated byEquiprx
Water Purification Service ProvidersView All (6)
Documents & Manuals
There are no Documents or Manuals available.
Features of Type II DI Standard Flow
Features and Benefits of a AQUA SOLUTIONS' Type II System
- The system includes one installed plus one spare DI Module.
- Made in the USA.
- The sensor displays a Green LED when water quality is >2-megohm-cm and a Red LED flashes when it’s time to change DI Modules.
- Ion Exchange Capacity is 3,000 Grains.
- One (1) year warranty.
- You purchase and own the system hardware at a reasonable cost.
- The system is so easy to install, you can do it yourself.
- You can install the spare DI tank yourself, whenever you need it - even on weekends!
- If the DI tank exhausts in the middle of an experiment, or during a weekend, you can install the spare tank.
- See for yourself - compare the total cost of our Type II/III DI systems with the competition.
General Specifications
There are no General Specifications available.
Series Modals
AQUA SOLUTIONS - 2618S1
[+] View Model SpecificationsFlow Rate | 3 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap AND/OR RO Ion Exchange Capacity: 3,000 Grains This single tank 3-LPM Type II DI system is designed for applications that require up to up 40-Liters of Type II/III DI water/day, when fed tap water containing up to 85 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 20" (508mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2618S1-RO
[+] View Model SpecificationsFlow Rate | 3 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 3,000 Grains This single tank 3-LPM Type II/III DI System requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 20" (508mm) tall DI tanks, a pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2618S2
[+] View Model SpecificationsFlow Rate | 3 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap AND/OR RO Ion Exchange Capacity: 6,000 Grains This dual tank 3-LPM Type II/III DI System is designed for applications that require up 80-Liters of Type II/III DI water/day, when fed tap water containing up to 170 PPM of total dissolved solids. The system includes two installed plus one spare 7" (178mm) diameter by 20" (508mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2618S2-RO
[+] View Model SpecificationsFlow Rate | 3 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 6,000 Grains This dual tank 3-LPM Type II/III DI System requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes two installed plus one spare 7" (178mm) diameter by 20" (508mm) tall DI tanks, pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S1
[+] View Model SpecificationsFlow Rate | 6 L/min or 12 L/min. |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap AND/OR RO Ion Exchange Capacity: 6,000 Grains This single tank Type II/III DI System is designed for applications that require up 80-Liters of Type II/III DI water/day, when fed tap water containing up to 170 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S1-1/2
[+] View Model SpecificationsFlow Rate | 12 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap or RO Ion Exchange Capacity: 6,000 Grains 80-Liters of Type II/III DI water/day, when fed tap water containing up to 170 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S1-RO
[+] View Model SpecificationsFlow Rate | 6 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 6,000 Grains This single tank 6-LPM Type II/III DI System requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, a pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S1-RO-1/2
[+] View Model SpecificationsFlow Rate | 12 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 6,000 Grains This single tank 12-LPM Type II/III DI System is designed for applications that require Type II/III DI water and requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, a pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S2
[+] View Model SpecificationsFlow Rate | 6 L/min or 12 L/min. |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap AND/OR RO Ion Exchange Capacity: 12,000 Grains This dual tank Type II/III DI System is designed for applications that require up 160-Liters of Type II/III DI water/day, when fed tap water containing up to 340 PPM of total dissolved solids. The system includes two installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S2-1/2
[+] View Model SpecificationsFlow Rate | 12 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: Tap or RO Ion Exchange Capacity: 12,000 Grains This dual tank 12-LPM Type II/III DI System is designed for applications that require up 160-Liters of Type II/III DI water/day, when fed tap water containing up to 340 PPM of total dissolved solids. The system includes two installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, an activated carbon prefilter assembly with pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S2-RO
[+] View Model SpecificationsFlow Rate | 6 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 12,000 Grains This dual tank 6-LPM Type II/III DI System is designed for applications that require Type II/III DI water and requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, a pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - 2635S2-RO-1/2
[+] View Model SpecificationsFlow Rate | 12 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: >2 MΩ-cm Feed Source: RO Ion Exchange Capacity: 12,000 Grains This dual tank 12-LPM Type II/III DI System is designed for applications that require Type II/III DI water and requires RO pretreated feed water containing up to 20 PPM of total dissolved solids. The system includes one installed plus one spare 7" (178mm) diameter by 37" (940mm) tall DI tanks, a pressure regulator and gauge, and a purity monitor light. |
AQUA SOLUTIONS - RODI-T2
[+] View Model SpecificationsFlow Rate | 4 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: 2-15 MΩ-cm Feed Source: Tap Water Ion Exchange Capacity: 2,000 Grains Ro Production: 10-LPH Storage Capacity: RO, 42-Liters This compact, combination Reverse Osmosis plus Type II DI System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS (total dissolved solids). The 10-LPH reverse osmosis portion of this system reduces operating costs by economically removing ~95% of the contaminants from the incoming tap water The Type II DI portion of this system produces 2-15 Megohm-cm water at a flow rate of 4 Liters/minute. |
AQUA SOLUTIONS - RODI-T2-H
[+] View Model SpecificationsFlow Rate | 4 L/min |
Water Purification Method | Other |
ASTM Type | ASTM Type II |
Additional Model Specifications | Resistivity @ 25 °C: 2-15 MΩ-cm Feed Source: Tap Water Ion Exchange Capacity: 6,000 Grains Ro Production: 20-LPH Storage Capacity: RO, 42-Liters This compact, combination Reverse Osmosis plus Type II DI System is for operation on virtually any quality tap water, containing up to 1,000 PPM of TDS (total dissolved solids). The 20-LPH reverse osmosis portion of this system reduces operating costs by economically removing ~95% of the contaminants from the incoming tap water The Type II DI portion of this system produces 2-15 Megohm-cm water at a flow rate of 4 Liters/minute. |