AMETEK - Jerome J605
Gold Film Hydrogen Sulfide Analyzer
The J605 is housed in a light and ergonomically designed case, setting a new precedent for low-level, portable monitors. The industry-proven, gold film sensor has been upgraded and improved from previous models, resulting in longer life expectancies.
Ultra Sensitive
Detect hydrogen sulfide in air at levels as low as 3 parts per billion (3ppb).
Proven
The Jerome’s gold film sensing technology has been validated in the laboratory and in the field for more than 35 years.
Rugged
Sturdy metal housing and solid-state design make the J605 tough enough for nearly any environment.
Reliable
With 18 hours of battery life per charge, the J605 is always ready when you need it.
Smart
Features on-board data logging for up to 20,000 measurements, USB data transfer, and SCADA interface capabilities through 4-20ma output.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of Jerome J605
Ultra Low-Level Detection: The Jerome J605 can detect H2S in air at levels as low as 3 parts per billion (ppb) with a resolution of 20 parts per trillion (ppt).
Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
Intuitive Interface: The J605 offers simple, menu driven operation as well as easy to understand diagnostics and error detection. It does not require PC software and comes with a USB interface for easy data transfer.
Versatile: The J605 has a wide detection range that makes it useful for multiple applications, including regulatory compliance and odor control at wastewater and landfill facilities, scrubber efficiency testing and monitoring corrosion in control rooms.
Regulatory Compliance: The J605 is in active use by many regulatory agencies and landfill, water treatment and waste management facilities across the world.
Data Logging: The integrated data logging system of the J605 can store data for up to 20,000 samples, including date, time and location.
Survey Mode: The J605 features a survey mode that allows the user to continuously draw in samples of air in order to sweep an area for hydrogen sulfide hot-spots and enable corrective action to be taken.
Durable: Housed in a light, ergonomically designed, durable metal casing, the J605 sets a new precedent for portable, low-level H2S monitors.
Field Regeneration: The J605 offers battery powered sensor regeneration that can be performed wherever and whenever you need it, allowing for extended testing in the field.
General Specifications
There are no General Specifications available.
Additional Specifications
Detection Range: 3 ppb (0.003 ppm) – 10 ppm
Resolution: 20 ppt (0.02 ppb) *range dependent
Accuracy: ±1 ppb at 5 ppb ±3 ppb at 50 ppb ±0.03 ppm at 0.5 ppm ±0.3 ppm at 5.0 ppm
Response Time: Survey Mode: 12-27 seconds
Manual Mode: 12-27 seconds
Auto Mode: 12-53 seconds
Flow Rate: 150 mL/min
Result Units: ppm, ppb
Integrated Data Storage: 20,000 samples; retains date, time and location
Display: 3.5” (9 cm) backlit LCD display
Battery: Rechargeable NiMH 18 hour life, charges in 3 hours
Power Requirements: 12 VDC for the instrument 100-240 VAC, 47-63 Hz, 3.2 A for the AC power supply/charger
Fuse: Auto-resetting fuse
Operating Environment: 0°C to 40°C, non-condensing, non-explosive
Output: Digital: USB serial data to PC, printer or USB flash drive
Analog: 4-20 mA passive current loop; accurate to 0.3% of output
Dimensions: 11″ L x 6″ W x 6.5″ H (28 cm L x 16 cm W x 17 cm H)
Weight: 5.4 lbs. (2.5 kg)
Certifications: TUV 61010, CE