Peak Scientific - PG28L - PURGE GAS GENERATOR
Manufactured by Peak Scientific
The PG28L gas generators from Peak Scientific are suitable for laboratory detectors requiring CO2 free gas such as FT...
The PG28L gas generators from Peak Scientific are suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.
Requiring minimal maintenance, the PG28L does require an external source of air to operate, Peak Scientific will be able to help with recommending a suitable air source if your laboratory does not have one.
Active Questions & AnswersAsk a Question
There are no current Discussions
Purge Service ProvidersView All (7)
Documents & ManualsView All Documents
Features of PG28L - PURGE GAS GENERATOR
- Purge Gas (PG) generators from Peak Scientific offer gas which is free of organic contaminants such as carbon dioxide
- Ideal for commercial labs with a high throughput rate of samples
- High-performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point)
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost-effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- 12-month comprehensive on-site warranty
General Specifications
| Depth | 9.8 in |
| Flow Rate | 28 L/min |
| Height | 6 in |
| Width | 9.8 in |
| Power Requirements | Voltage: 120/ 240VAC; Frequency: 50/60Hz; Current: 8 amps |
| Weight | 45 kg |
| Gas Generated | Purge |
Additional Specifications
Inlet Pressure: 100-120psi
Outlet Pressure: 100psi
Dew Point: -94°F/-70°C