1. Home
    2.  / 
  2. Basic Laboratory
    3.  / 
  3. Mixers
    4.  / 
  4. SPEX SamplePrep - 8000D Mixer/Mill - Dual High-Energy Ball Mill

SPEX SamplePrep - 8000D Mixer/Mill - Dual High-Energy Ball Mill

Manufactured by  SPEX SamplePrep
Follow this Equipment

The 8000D Mixer/Mill is a high-energy ball mill with dual clamps that grinds up to 0.2 - 10 grams of dry, brittle...

The 8000D Mixer/Mill is a high-energy ball mill with dual clamps that grinds up to 0.2 - 10 grams of dry, brittle samples. It reduces samples to analytical fineness and can be utilized for mechanical alloying, slurry grinding, blending powders and mixing emulsions. Each grinding vial contains a sample and one or more balls. It is then shaken in a complex motion that combines back-and-forth swings with short lateral movements in the shape of a figure-8. The clamp's motion develops strong G-forces in the vial, to pulverize the toughest rocks, slags and ceramics.
Active Questions & AnswersAsk a Question

There are no current Discussions

Mixers Service ProvidersView All (2)

Request Support
Features of 8000D Mixer/Mill - Dual High-Energy Ball Mill
  • Dual clamps enable multiple sample processing for high-throughput applications.   
  • Equipped with forced-air cooling and safety interlock system for operator protection.   
  • Electronic timer is set for 100-minute range. Extended Running Time Chip is available for extended timer range to 175 hours (10,500 minutes).   
  • Grinds multiple samples in the 0.2 - 10 gram range or mixes up to 50 mL of material per clamp. Multiple-Sample Adapters permit processing of smaller grinding vials.   
  • Shock mounted motor enables bench top operation.   
  • Steel housing protects the clamp mechanism and rugged construction ensures a long life of heavy work.   
  • Vibration detection switch shuts down the mill in the event of mechanical failure.
    • General Specifications

    There are no General Specifications available.

    Additional Specifications

    Voltage: 115V/60Hz or 230V/50Hz   
    CE Approved: Yes   
    Dimensions: 25” L (64 cm) x 21” W (54 cm) x 14” H (36 cm)   
    Gross Weight (lbs): 92 lbs (42kg)   
    Motor: 1/3 hp, 1725 RPM @ 60Hz, 1425 RPM @ 50Hz   
    Power Cord: 3-prong grounded plug, 115V 60Hz or 2-prong European plug, 230V50Hz   
    Clamp Movement: 2 1/3 in (5.9cm) back-and-forth, 1 in (2.5cm) side-to-side   
    Clamp Speed: 1060 cycles/minute (115V) or 875 cycles/minute (230V)   
    Timer/Controls: Start and stop buttons, programmable 100-minute timer withdigital display

    Looking for New or Used Equipment?

    Shop on LabX

    Shop on Labx.com