So-Low - General Purpose Laboratory Incubators

Manufactured by So-Low

No Documents

General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application...

General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.

Active Questions & AnswersAsk a Question

There are no current Discussions

General Purpose Incubator Service ProvidersView All (29)

Request Support

Copia Scientific View Vendor

View All

Manuals & DocumentsFeaturesSpecifications

Documents & Manuals

There are no Documents or Manuals available.

Features of General Purpose Laboratory Incubators

Degree of Uniformity
Triple Wall Construction
Unique Design
Ensure Heating Uniformity
One Year Warranty

General Specifications

There are no General Specifications available.

Series Modals

So-Low - SMI11

[+] View Model Specifications

So-Low - SMI12

[+] View Model Specifications

So-Low - SMI2

[+] View Model Specifications

So-Low - SMI31

[+] View Model Specifications

So-Low - SMI39

[+] View Model Specifications

So-Low - SMI6

[+] View Model Specifications

So-Low - SMI7

[+] View Model Specifications

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com

Depth	68 cm
Height	96 cm
Width	106 cm
Additional Model Specifications	Product Specifications Model SMI11 General Purpose Incubator, Single Chamber With Side By Side Doors, 11.25 Cu.Ft. General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door, ensure uniform heating, even when the incubator chamber is fully loaded. The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. Features include: [] Microprocessor Control [] Temperture Sensitivity +/- 0.1C [] Independent Overtemperature Thermostat [] Unique Warm Air Jacket Design [] Interior Outlet [] Heated Outer Door (GI Series Only) [] Viewing Door [] Small Foot Print [] Stainless Steel Interior (GI Series Only) [] Stainless Steel Shelves [] UL Approval [] 24 Month Limited Warranty Features Capacity: 11.3 cu.ft. Interior Dimensions WxDxH (cm): 91 x 51 x 69 Temperature Range: Ambient +8 to 70°C Temperature Uniformity: +/-0.35°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 850W; Amps: 5.9A Jacket Type: Air Shelving: 6 Supplied (12 Maximum) Access Port: Yes Interior Outlet: One

Depth	69 cm
Height	193 cm
Width	64 cm
Weight	425 lbs
Additional Model Specifications	Product Specifications General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. [] Microprocessor Control [] Independent Overtemperature Thermostat [] Unique Warm Air Jacket Design [] Interior Outlet [] Heated Outer Door (GI Series Only) [] Viewing Door [] Small Foot Print [] Stainless Steel Interior (GI Series Only) [] UL Approval [] 24 Month Limited Warranty Features Capacity: 12 cu.ft. Interior Dimensions WxDxH (cm): 51 x 51 x 66 Temperature Range: 8°C above ambient to 70°C Temperature Uniformity: +/-0.35°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 650W; Amps: 5A Jacket Type: Air Shelving: 6 Supplied (24 Maximum) Access Port: Yes Interior Outlet: One each

Depth	37 cm
Height	38 cm
Width	38 cm
Weight	125 lbs
Additional Model Specifications	Product Specifications General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. [] Microprocessor Control [] Independent Overtemperature Thermostat [] Unique Warm Air Jacket Design [] Interior Outlet [] Heated Outer Door (GI Series Only) [] Viewing Door [] Small Foot Print [] Stainless Steel Interior (GI Series Only) [] UL Approval [] 24 Month Limited Warranty Features Capacity: 1.9 cu.ft. Interior Dimensions WxDxH (cm): 38 x 37 x 38 Temperature Range: 8°C above ambient to 70°C Temperature Uniformity: +/-0.35°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 450W; Amps:4.5A Jacket Type: Air Shelving: 2 Supplied (6 Maximum) Access Port: Yes Interior Outlet: One

Depth	82 cm
Height	186 cm
Width	96 cm
Weight	600 lbs
Additional Model Specifications	Product Specifications General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. [] Microprocessor Control [] Viewing Window [] Roller Bottle Apparatus Accommodation [] Interior Outlet [] Powder Coated White Interior [] Six Shelves [] Access Port [] 24 Month Limited Warranty Features Capacity: 31.8 cu.ft. Interior Dimensions WxDxH (cm): 84 x 66 x 163 Temperature Range: 8°C above ambient to 70°C Temperature Uniformity: +/-0.8°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 1485W; Amps: 8.5A Access Port: One Shelving: 6 Supplied (16 Maximum) Interior Outlet: Four

Depth	83 cm
Height	229 cm
Width	105 cm
Weight	625 lbs
Additional Model Specifications	Product Specifications General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. [] Microprocessor Control [] Viewing Window [] Roller Bottle Apparatus Accommodation [] Interior Outlet [] Powder Coated White Interior [] Six Shelves [] Access Port [] 24 Month Limited Warranty Features Capacity: 40 cu.ft. Interior Dimensions WxDxH (cm): 89 x 66 x 193 Temperature Range: 8°C above ambient to 70°C Temperature Uniformity: +/-0.8°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 1650W; Amps: 12.5A Access Port: Available Option Shelving: 6 Supplied (20 Maximum) Interior Outlet: Four

Depth	78 cm
Height	81 cm
Width	76 cm
Weight	195 lbs
Additional Model Specifications	Product Specifications General purpose incubators deliver a degree of temperature uniformity usually found only in more expensive, application specific models. This high level of performance is due to a precise microprocessor controller and a unique warm air jacket design. Triple wall construction allows heated air to circulate within an open plenum between the inner chamber and exterior walls. This design does not require blowers or fans within the incubator chamber where samples are susceptible to cross contamination and the drying effects of convection. Five strategically placed heating elements, including a heated outer door; ensure uniform heating, even when the incubator chamber is fully loaded.The General Purpose Incubator Family ranges in size from 2 to 40 cu.ft. This superior line of incubators has created a level of comfort and convenience for professionals that are unrivaled. [] Microprocessor Control [] Independent Overtemperature Thermostat [] Unique Warm Air Jacket Design [] Interior Outlet [] Heated Outer Door (GI Series Only) [] Viewing Door [] Small Foot Print [] Stainless Steel Interior (GI Series Only) [] UL Approval [] 24 Month Limited Warranty Features Capacity: 6.7 cu.ft. Interior Dimensions WxDxH (cm): 61 x 61 x 51 Temperature Range: 8°C above ambient to 70°C Temperature Uniformity: +/-0.35°C at 37°C Electrical Specifications: Volts: 120V; Hertz: 50/60Hz; Watts: 650W; Amps: 4.5A Jacket Type: Air Shelving: 2 Supplied (9 Maximum) Access Port: Yes Interior Outlet: One