Teledyne Isco - ACCQPrep HP150
High Pressure Preparative Liquid Chromatography System
The Teledyne ISCO ACCQPrep HP150 was developed and designed with the ease of a Flash system in mind. It does not follow the traditional path of an analytical system, but rather this system has be?en designed to be intuitive and easy-to-use.
The ACCQPrep HP150 eliminates the unnecessary and complex integration parameters found in many of the HPLC systems in today's market. Our PeakTrak software, which currently drives our CombiFlash product line, is the basis for controlling the ACCQPrep HP150. By using this software, the need for a standalone PC is eliminated. This results in a smaller, more compact unit with an integrated touch screen interface.
Enjoy the confidence associated with Teledyne ISCO's active solvent and waste level monitoring which reduces the risk of solvent spills. In addition, all sample and collection racks are RFID coded eliminating the potential of missed tubes.
An exciting feature of the ACCQPrep HP150 is the Focus Gradient Generator. When activated, the user is prompted to run a preset scouting gradient then they select the target peak for purification and the focused gradient is automatically programmed into the system.
The ACCQPrep HP150 is compatible with Teledyne ISCO Automation Modules and other detection systems for maximum efficiency.
Active Questions & AnswersAsk a Question
There are no current Discussions
HPLC Systems Service ProvidersView All (54)
Documents & ManualsView All Documents
Features of ACCQPrep HP150
Standard Features
- Flow rates from 1 to 150 mL/min allow development of Prep methods directly on the system without the need for pump head changes
- Operating pressure up to 6000 psi
- Choice of UV or UV-Vis plus ELSD and MS options
Compatible with Automation Modules
- Use the AutoInjector Module to make multiple purification runs on the same sample
- Use the AutoSampler Module if you have several different samples to purify which may require multiple injections and different chromatographic conditions
- Use the Column Selector Module to automatically switch to the next column required for your purification
Compatible with PurIon Mass Spectrometer
- Add mass directed fractionation to your purification
- Use with Teledyne ISCO's PeakTrak software for single point control of all mass spectrometer parameters
- Choose from three models to meet the needs of your application
General Specifications
| Depth | 20 in (50.8cm) |
| Height | 27.5 in (69.9 cm) |
| Width | 14 in (35.6cm) |
| Standard Flow Rate | 1 to 150 ml/min |
| Weight | 84.5 lbs (38.2 kg) |
Additional Specifications
Pressure Limit: up to 6000 psi (400 bar) Lower pressure limits user defined
UV and UV-Vis Detection: Variable UV 200 - 400 nm standard, Variable UV-Vis 200 - 800 nm option
ELSD Detection: Integrated Option that can be combined with either UV or UV-Vis
Number of Solvents: Binary gradient. 2 solvent std. 2x3 solvents optional
Gradient Formation: High Pressure
Programmable gradients: Linear, step, isocratic
Gradient Linearity: +/- 1%
Sample Introduction: Variable volume liquid load (5mL loop standard)
User Interface: 15 in touchscreen
Fraction Collector: Internal
Dimensions AS 2x2 Autosampler Module: 18.9 x 14.0 x 19.3 in (48.0 x 35.6 x 49.0 cm) (H x W x D); 31.1 lbs (14.1 kg)
Dimensions AS 4x2 Autosampler Module: 27.5 x 23 x 22 in (69.9 x 58.4 x 55.9 cm) (H x W x D); 42.2 lbs (19.1 kg)