Kinematica - MEGATRON MT 3000

Manufactured by  Kinematica
Follow this Equipment

In-line processing from lab to pilot plant to processing stream.

The MEGATRON® MT 3000 is the smallest available continuous working In-Line/Recirculating homogenizing system with scale up possibility at comparable tip speeds and a throughput capacity of approx. 10 to 15 l/min. This unit, with its unique features, will improve already known applications and enter new areas of applications. This will be achieved by much higher tip speeds i.e. by adjustable rotor speeds up to 30‘000 rpm. Thus results will be obtained with even finer and smaller droplets/particles down to approx. 1 µm depending on the properties of the processed media. The MEGATRON® MT 3000 processor will mostly be installed to a recirculating system as an alternative way of batch processing.    
    
The main advantage of the MEGATRON® MT 3000is the possibility of simulating later pilot plant or production on a laboratory scale. These tests can be done with a minimum amount of product and energy.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Updated byPeethrina Niens

Mills and Grinders Service ProvidersView All (1)

Request Support
Features of MEGATRON MT 3000
  • 800 Watt powerful drive unit with a wearless three phase highfrequency     motor for continuous operation    
  • controlled by a frequency inverter, connection to a standard 230 V wall     socket    
  • electronic speed regulation and stabilization    
  • Soft-Start and thermal overload protection (PTC)    
  • variable, stepless speeds up to 30 000 RPM with visual indication    
  • noise level lower than <75 dB(A)    
  • In-Line working chamber with single mechanical seal and quench system and NW8 tube olives as standard inlet/outlet connections (others on request)    
  • 3 different Dispersing Generators, easily interchangeable    
  • all parts in contact with the product are made of electropolished stainless steel 316L    
  • Permanently lubricated, high temperature resistant, high speed ball bearings    
  • Large collection of recirculating systems with dispersing vessels and     accessories    
  • CE label
General Specifications
Depth 200 mm
Flow Rate15 L/min
Height230 mm
Width 390 mm
Power Requirements 230V / 50Hz or 100-120V / 60 Hz (with transformer)
Noise Level75 dB
Weight10.78 kg
MotorHigh frequency drive, 800 Watt
Homogenizer TypeMechanical
Maximum Speed30000 rpm
Mill TypeBall Mill/Planetary Ball Mill
Additional Specifications

Speed display: LED    
Speed regulation: integrated frequency inverter, speed stabilisation, thermal overload protection (PTC)     
Protection class: IP 20    
Certified standards: EMC acc. IEC/EN 61000-6-2 / 3; Safety acc. IEC/EN 61010-2-51    
Dimensions:   
Drive: 230x160x160 mm    
Control Unit: 160x200x220 mm    
Weight:    
Drive: 6.84 kg    
Control Unit: 3.94 kg

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com