LabStrong - FI-Streem III Bi-Distiller (Cyclon BD)
LabStrong Fi-Streem III Bi-Distiller
Of all the water purification technologies available, distillation can remove a wider range of impurities than any other single form of water purification. LabStrong Fi-Streem Stills produce high quality ASTM Type II water and can remove inorganic ions, dissolved gasses, organics, particles, bacteria, pyrogens and nucleases from water.
LabStrong Fi-Streem Stills will meet your water needs while remaining budget-friendly. The LabStrong Fi-Streem III Bi-Distiller uses a double distillation process that increases water purity to above 1 megohm-cm.
*IMPORTANT NOTE: The LabStrong Fi-Streem Stills have replaced the Barnstead Fi-Streem Stills.
Active Questions & AnswersAsk a Question
There are no current Discussions
Water Purification Service ProvidersView All (6)
Documents & ManualsView All Documents
Features of FI-Streem III Bi-Distiller (Cyclon BD)
- Consistently produces ASTM Type II water
- Patented vapor trap eliminates carry-over of contaminants in the vapor-borne water droplets
- Glass components eliminate leaching impurities.
- Can easily be turned off for extended periods of time and returned to service without the need for consumables or sanitizing, saving money and resources
- Totally enclosed still assures safety from breakage and hot surfaces
- Fully automatic microprocessor controls simplify operation and cleaning while assuring high reliability
- 24-hour automatic control* activates still as required to maintain a full reservoir
- Thermistor and heat sensor offer double protection against low water conditions
- Space-saving design with bench or wall mounting options (includes wall mount bracket)
- Double distillation process increases water purity
- For convenience, designed with dual feed capabilities for tap or pretreated feedwater
- Base of still designed to contain accidental leaks within the still
- All necessary tubing included to complete installation
- *Automatic start/stop feature when connected to LabStrong 20 Liter Carboy (B00122), 40 Liter Storage Tank (B00121) or 50 Liter Carboy (A1058LS)
- 1 year warranty
- Preventive maintenance services available
- Installation services available
- IQOQ available
- Feed Water Type: Tap or Pretreated
- Feed Water Inlet: 1/2'' ID Tubing
- Feed Water Operational Temperature Range: 40° - 120°F
- Feed Water Cooling Water Temperature: 40° - 86°F
- Cooling Water (LPH): 120
- Product Water Capacity (LPH): 4 (Bi-Distilled)
- 4 Heaters
- Feed Water Minimum Pressure: 10 PSI
- Feed Water Maximum Pressure: 80 PSI
General Specifications
There are no General Specifications available.
Series Modals
LabStrong - A56230-857LS
[+] View Model SpecificationsDepth | 14.75 in |
Flow Rate | 4 L/hr Bi-Distiller |
Height | 29.5 in |
Width | 18 in |
Power Requirements | 240 V, 50/60 Hz, 30 Amps |
Water Purification Method | Distillation |
Weight | 67 lbs |
Part Number | A56230-857LS |
Shipping Weight | 93 lbs |
ASTM Type | ASTM Type II |
Additional Model Specifications | IMPORTANT NOTE: The LabStrong Fi-Streem model number A56230-857LS is the direct replacement of the Barnstead Fi-Streem model number A56230-857. Feed Water Type: Tap or Pretreated Feed Water Inlet: 1/2'' ID Tubing Feed Water Operational Temperature Range: 40° - 120°F Feed Water Cooling Water Temperature: 40° - 86°F Cooling Water (Liters Per Hour): 120 Feed Water Minimum Pressure: 10 PSI Feed Water Maximum Pressure: 80 PSI 4 Heaters |
LabStrong - A56238-857LS
[+] View Model SpecificationsDepth | 14.75 in |
Flow Rate | 4 L/hr Bi-Distiller |
Height | 29.5 in |
Width | 18 in |
Power Requirements | 208 V, 50/60 Hz, 30 Amps |
Water Purification Method | Distillation |
Weight | 67 lbs |
Part Number | A56238-857LS |
Shipping Weight | 93 lbs |
ASTM Type | ASTM Type II |
Additional Model Specifications | IMPORTANT NOTE: The LabStrong Fi-Streem model number A56238-857LS is the direct replacement of the Barnstead Fi-Streem model number A56238-857. Feed Water Type: Tap or Pretreated Feed Water Inlet: 1/2'' ID Tubing Feed Water Operational Temperature Range: 40° - 120°F Feed Water Cooling Water Temperature: 40° - 86°F Cooling Water (Liters Per Hour): 120 Feed Water Minimum Pressure: 10 PSI Feed Water Maximum Pressure: 80 PSI 4 Heaters |