FRITSCH GmbH - Vario-Planetary Mill PULVERISETTE 4 classic line
Unique with a variable transmission ratio
In contrast to conventional Planetary Mills, the rotational speed of the grinding bowls and supporting disk can be configured separately in the PULVERISETTE 4 classic line with 2 working stations. Your advantage: A single mill for mechanical activating and alloying providing optimum grinding conditions suited to the respective material to be ground and the size of the grinding bowls and balls! For results that cannot be achieved with other Ball Mills.
The mill is controlled by integral software, in which up to 9 programmes can be saved and then loaded quickly and easily via the mill display.
WORKING PRINCIPLE
Variable Transmission Ratio
The PULVERISETTE 4 classic line also operates according to the Planetary Principle, but the transmission ratio between grinding bowls and supporting disk is variable adjustable. Your advantage: You can directly influence the movement and paths of the grinding balls: Depending on the setting, you can obtain high impact energy or high friction, according to your needs, or have your PULVERISETTE 4 classic line operate as a Centrifugal Mill. You are free to choose all intermediate levels and combinations between friction-based and impact-based comminution.
Due to the rotational speed of the main disk – up to 400 rpm – achieves the PULVERISETTE 4 classic line a centrifugal acceleration of up to 22 g.
Active Questions & AnswersAsk a Question
There are no current Discussions
Mills and Grinders Service ProvidersView All (1)
Documents & ManualsView All Documents
Features of Vario-Planetary Mill PULVERISETTE 4 classic line
- Flexible configurable grinding conditions: impact and/or friction * Rotational speed up to 400 rpm * Ideal for mechanical alloying and activating * Especially suited for material research and development applications * Simultaneous processing of up to 4 samples * Useful capacity of 2 x 0.5 ml to 2 x 225 ml * Free programming of the grinding parameters, incl. grinding and pause times and grinding cycles through PC software * Real-time display of the rotational speed for monitoring of the grinding process * WINDOWS™ control and evaluation programme * Reversing function * Forced air ventilation of the grinding chamber * Safety interlock of the grinding chamber with standstill monitoring * Overload protection through rotational speed adjustment * Maintenance-free drive * Long service life due to high-performance belt drives and permanently lubricated bearings * Membrane keyboard * Extensive accessories for simplifying your daily work
General Specifications
Depth | 80 cm |
Height | 110 cm |
Width | 60 cm |
Weight | 320 kg |
Feed Materials | hard, medium-hard, soft, brittle, tough, moist |
Final Particle Fineness | 1 µm (<1) |
Grinding Tool Materials | agate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, hardmetal tungsten carbide |
Grinding Tools | Grinding bowls and grinding balls |
Max. Feed Particle Size | 10 mm |
Mill Type | Ball Mill/Planetary Ball Mill |
Operating Principle | Impact force |
Additional Specifications
Number of working stations: 2
Grinding bowl sizes: 12, 45, 80, 250, 500 ml
Grinding ball diameter: 0.1 - 40 mm
Max. feed size (depends on material): 10 mm
Min. sample quantity: 0.5 ml
Max. sample quantity: 450 ml
Final fineness (depends on material): < 1 µm
Typical grinding time down to analytical fineness: 4 min
Grinding process: dry/wet
Grinding in inert gas: yes
Gas pressure and temperature measurement: yes
Rotational speed of main disk: 0 - 400 rpm
Transmission ratio planetary disk / grinding bowl: variable
Effective diameter of main disk: ~ 250 mm
Centrifugal acceleration (g = 9.81 m/s²): 22 g
Interfaces: yes
Electrical details: 380-480 V/3~, 50-60 Hz, 6000 Watt
Instrument also available in the following voltage: 200-240 V/3~, 50-60 Hz, 6000 Watt - order no. 04.1020.00
Emission sound pressure level at the workplace according to DIN EN ISO 3746
(depending on the material to be ground, grinding bowls/balls, selected rotational speed): up to approx. LpAd = 81 dB