Accuri Cytometers - C6®

Manufactured by  Accuri Cytometers
Follow this Equipment

High performance analytical cytometers that match the functionality of the best-selling analytical flow cytometers.

Accuri C6 Flow Cytometers, CFlow® Software and Workstation PC supply all the capabilities of a full-featured flow cytometer at a fraction of the price of the market leading systems. The C6 system includes blue and red lasers, four color detectors and both forward and side scatter detectors plus software that is so intuitive that you will typically be up and running within an hour of receiving your Accuri system.

Our engineers had a daunting task-build a cytometer that is compact, simple to operate, easy to afford, and matches the performance of the best selling analytical flow cytometers. We started by listening to scientists like you and then designing a flow cytometer from the ground up incorporating your needs. We worked hard to provide the performance for most experiments, while making the C6 easier to use, simple to maintain, and affordable for everyone.

Accuri's innovations in fluidics, optics, electronics and software, coupled with state-of-the-art components, result in a cytometer that is powerful, robust, compact and affordable. We also developed an intuitive user interface that can be mastered in minutes. And we've done all of this so you can focus on one thing: advancing your science, in your lab.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byLabWrenchEditor

Flow Cytometers Service ProvidersView All (6)

Request Support
Features of C6®
  • Over 7 Decade dynamic range
  • Optical bench needs no alignment
  • Fluidics control
  • Absolute counts
  • Maintenance made simple
  • Works with current protocols and reagents
  • FCS 3.0 compatible file format
  • Compact size
  • Low power usage
General Specifications

There are no General Specifications available.

Additional Specifications

Excitation:
488nm (rated at 20,000hr life)
640nm (rated at 20,000hr life)
Laser profile: 15 x 75 microns
Scatter detection:
Forward (0 degrees, +/-15)
Side (90 degrees, +/-15)
Emission detection: 4 colors, user swappable optical filters
Standard set installed:
- FL1 530 / 30nm (FITC/GFP)
- FL2 585 / 40nm (PE/PI)
- FL3 >670nm (PE-Cy5, PE-Cy5.5, PerCP-Cy5.5,PE-Cy5, PE-Cy7)
- FL4 675 / 25nm (APC)
Optical alignment: Fixed alignment, no maintenance required
Flow cell: 200 micron ID quartz capillary
Minimum particle size: 1 µm
Minimum sample size: 30 µl
Nominal flow rate - variable: 10 to 100 µl/min ; CFlow Plus only
Fixed Flow Rates & Core Sizes:
Slow - (Flow = 14uL/min ; Core = 10 um)
Medium - (Flow = 35uL/mim ; Core = 16 um)
Fast - (Flow = 66 uL/min ; Core = 22 um)
Recommended Sheath Fluid: 0.2 um filtered DI water
Core diameter: User selectable from 5 to 40 microns, CFlow Plus Only
Florescence sensitivity: <750 MESF FITC
Scatter resolution: Resolves human peripheral blood erythrocytes, lymphocytes, monocytes & granulocytes
Fluorescence linearity: 2+/-0.05% for chick erythrocyte nuclei (CEN)
Fluorescence precision: <3% CV for CEN
Speed: 10,000 events/second maximum
Absolute counts: Yes; CFlow Plus only
Warm-up time: Less than 5 minutes
Power: 70 Watts maximum, 100-240 VAC, 50/60 Hz
Heat output: 240 Btu/hour maximum output
Operating ranges: 15-30°C; <80% relative humidity
Instrument size: 11"H x 14.75"W x 16.5"D (27.9 x 37.4 x 41.9 cm)
Foot print with fluid tanks: 11"H x 21.5"W x 16.5"D (27.9 x 54.6 x 41.9 cm)
Weight: 30 lbs (13.6 kg)
Fluid tank capacity:
1L Sheath Fluid, 1L Waste
250mL Cleaner, 250mL Decontamination
Signal processing: 24-bit A/D conversion
Computer: 19" (48.26 cm) flat-panel monitor, 4GB memory
Computer interface: USB 2.0

Videos
Using a C6 in a Glovebox ...
Accuri CSampler for the C6 Flo...
Accuri C6 Packaging Test...
NewsView All Articles

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com