MilliporeSigma - AFS Analyzer Feed Systems
Manufactured by MilliporeSigma
Produce up to 16 liters per hour of consistently pure, CLSI (a) Type I water from tap water for direct feed to clinical analyzers
Designed specifically for the clinical lab, AFS systems are a family of analyzer feed water purification systems. The systems produce CLRW type water from tap water for direct feed to clinical analyzers. The AFS- 3D, AFS- 8D and AFS-16D systems include a degasser option for removing dissolved gases from the final product water.
The purified water is suitable for constant temperature water baths, cuvette washing, reagent reconstitution, on-board serum dilution, and any other procedure which requires reagent water.
The purified water is suitable for constant temperature water baths, cuvette washing, reagent reconstitution, on-board serum dilution, and any other procedure which requires reagent water.
Active Questions & AnswersAsk a Question
Water Purification Service ProvidersView All (6)
Documents & ManualsView All Documents
Features of AFS Analyzer Feed Systems
- Compact Enough to Fit the Layout of any Lab
- Meet Rigorous International Standards
- Enhanced Electronics
- AFS Systems Use Multiple Technologies to Produce CLSI Type I Water
- Easy Maintenance
- Product Water Quality Designed to Meet CLSI Type I Specifications
General Specifications
There are no General Specifications available.
Series Modals
MilliporeSigma - AFS-16, AFS-16D
[+] View Model SpecificationsDepth | 355 mm |
Flow Rate | 16 L/hr |
Height | 457 mm |
Width | 255 mm |
Power Requirements | Power (depending on system): 120 V, 60 Hz, 100 V, 50/60 Hz-70 VA-2A S.B. fuse; 230 V, 50/60 Hz -70 VA-1A S.B. fuse |
Water Purification Method | RO |
Weight | 15.5 kg |
ASTM Type | ASTM Type I |
Additional Model Specifications | AFS System Specifications Peak dispense rate (to atmosphere): 0.6 L max. Tank dispense capacity: 10 L max. Product pressure: 13–16 psi (1 bar ± 10 %) Typical RO ionic rejection rate*: 94 – 99 % Typical RO organic rejection rate: 99 % (>100 Da) Typical RO particulate rejection rate: 99 % Typical RO microbiological rejection rate: 99 % Typical system recovery: 28 – 38 % Typical noise level: 42 db A (at 1 meter) Incoming Feedwater Requirements Quality: Potable mains (tap) water Minimum feed flow rate: 2.0 L/min Total chlorine into Progard 3 Purification Pack: <1 ppm**† Dissolved gas content: = Saturated Maximum Fouling Index (SDI)(into Progard 3 pack): < 5*** Utility Requirements Outlet: Grounded (GF) protection recommended Distance: 1 m (3.3 ft) from system max. Drain distance: Max of 3.6 m (12 ft) of drain tubing and elevation limit 1 m (3ft) above system max. Drain capacity: 2 L/min Supply connections: 1/4 in or 1/2 in NPT preferred Product Line Length: 3.6 m (12 ft) max.; 6 ft length recommended AFS Systems Physical Characteristics Depth (without reservoir): 355 mm (14 in) Depth (with reservoir): 500 mm (19.5 in) Dry weight: 12.5 kg (27.5 lb)plus 1kg (tank) Weight in use (filled with water): 15.5 kg (34 lb)plus 13 kg (28 lb) (tank) |
MilliporeSigma - AFS-3, AFS-3D
[+] View Model SpecificationsDepth | 355 mm |
Flow Rate | 3 L/hr |
Height | 455 mm |
Width | 255 mm |
Power Requirements | Power (depending on system): 120 V, 60 Hz, 100 V, 50/60 Hz–70 VA-2A S.B. fuse; 230 V, 50/60 Hz–70 VA-1A S.B. fuse |
Water Purification Method | RO |
Weight | 15.5 kg |
ASTM Type | ASTM Type I |
Additional Model Specifications | AFS-3 and AFS-3D System Specifications Peak dispense rate (to atmosphere): 0.6 L max. Tank dispense capacity: 10 L max. Typical RO ionic rejection rate*: 96% Typical RO organic rejection rate: 99% (> 100 daltons) Typical RO particulate rejection rate: 99% Typical RO microbiological rejection rate: 99% System recovery: 10-15% Noise level: 42 db A (at 1 meter) Incoming Feed Water Requirements Quality: Potable mains (tap) water Inlet pressure into AFS system: 15–90 psi (1–6 bar) Minimum feed flow rate: 2.0 L/min. Total chlorine into Progard 2 pack: < 3 ppm Dissolved gas content: = Saturated Maximum fouling index SDI(into Progard 2 pack): < 12** Utility Requirements Outlet: Grounded (GF) protection recommended Distance: 1 m (3.3') from system max. Drain distance: Max of 3.6 m (12') of drain tubing and elevation limit 1 m (3’) above system max. Drain capacity: 2 L/min. Supply connections: 1/4” or 1/2” NPT preferred Product Line Length: 3.6 m (12’) max.; 6’ length recommended AFS Systems Physical Characteristics Depth (without reservoir): 355 mm (14") Depth (with reservoir): 500 mm (19.5") Dry weight: 12.5 kg (27.5 lbs) plus 1 kg (tank) Weight in use (filled with water): 15.5 kg (34 lbs) plus 13 kg (28 lbs) (tank) |
MilliporeSigma - AFS-8, AFS-8D
[+] View Model SpecificationsDepth | 355 mm |
Flow Rate | 8 L/hr |
Height | 457 mm |
Width | 255 mm |
Power Requirements | Power (depending on system): 120 V, 60 Hz, 100 V, 50/60 Hz-70 VA-2A S.B. fuse; 230 V, 50/60 Hz -70 VA-1A S.B. fuse |
Water Purification Method | RO |
Weight | 12.5 kg |
ASTM Type | ASTM Type I |
Additional Model Specifications | AFS System Specifications Peak dispense rate (to atmosphere): 0.6 L max. Tank dispense capacity: 10 L max. Product pressure: 13–16 psi (1 bar ± 10 %) Typical RO ionic rejection rate*: 94 – 99 % Typical RO organic rejection rate: 99 % (>100 Da) Typical RO particulate rejection rate: 99 % Typical RO microbiological rejection rate: 99 % Typical system recovery: 28 – 38 % Typical noise level: 42 db A (at 1 meter) Incoming Feedwater Requirements Quality: Potable mains (tap) water Minimum feed flow rate: 2.0 L/min Total chlorine into Progard 3 Purification Pack: <1 ppm**† Dissolved gas content: = Saturated Maximum Fouling Index (SDI)(into Progard 3 pack): < 5*** Utility Requirements Outlet: Grounded (GF) protection recommended Distance: 1 m (3.3 ft) from system max. Drain distance: Max of 3.6 m (12 ft) of drain tubing and elevation limit 1 m (3ft) above system max. Drain capacity: 2 L/min Supply connections: 1/4 in or 1/2 in NPT preferred Product Line Length: 3.6 m (12 ft) max.; 6 ft length recommended AFS Systems Physical Characteristics Depth (without reservoir): 355 mm (14 in) Depth (with reservoir): 500 mm (19.5 in) Dry weight: 12.5 kg (27.5 lb)plus 1kg (tank) Weight in use (filled with water): 15.5 kg (34 lb)plus13 kg (28 lb) (tank) |