New Brunswick Scientific - Innova 42 / 42R
Manufactured by New Brunswick Scientific
Use On or Under Your Lab Bench, Or Double-Stacked on the Floor
Our most versatile incubator shakers, New Brunswick Scientific's programmable Innova 42 & 42R lab shakers provide "set it and forget it" convenience. The Innova 42R shaker includes refrigeration for growing cultures at near- and sub-ambient temperatures. An optional photosynthetic light bank is also available. When refrigeration is not needed, Innova 42 does the job. Both multi-purpose laboratory shakers accept flasks to 6 liters, and have an adjustable-height shelf for added incubating or storing capability. With a new lower-height design and a front-opening door, these biological shakers can be used either on or under the bench, or double stacked for space savings.
Active Questions & AnswersAsk a Question
1Replies
user manual
1Replies
Powere of the innova 42
Shakers Service ProvidersView All (14)
Documents & ManualsView All Documents
Features of Innova 42 / 42R
- Controls for Entering and Viewing Setpoints are Exceptionally Easy to Use, and Positioned at the Top of the Shaker for Easy Access. Display is visible from all angles, across the room, and in the dark.
- Programmable Controller ramps temperature up or down on a timed basis. Speeds up, slows down, or stops agitation automatically. Or places your cultures in metabolic stasis until you’re ready to attend to them. On Innova 42R, optional photosynthetic lighting and UV decontamination are also programmable.
- Wide Temperature Range: Innova 42: 5°C above ambient to 80°C. Innova 42R: 20°C below ambient to 80°C. ( Minimum temperature 4°C)
- Uniform and Precise Temperature Control: ±0.1°C with uniformity of ±0.25°C at 37°C.
- Agitation: 25 - 400 rpm (±1 rpm) provides versatility for culturing a wide range of cell types. (When stacked, and using flasks larger than 500 mL, max. speed is 300 rpm or lower.)
- Single Adjustable-Height, Stationary Shelf adds storage for incubating plates and other samples.
- In-Chamber, Moisture-Proof Receptacle Provides Power for an Accessory Instrument such as rocker, roller, or second shaker.
- Large Viewing Window & Internal Light Provide Clear Chamber Visibility, minimizing the need to open the door. Rapid air circulation produces quick temperature equilibration and recovery.
- Output Signal to RS-232 Enables Data Logging and Computer Control.
- Timed Studies Can Be Programmed for Automatic Agitation Shut-Off. End-of-study alarm & status light can be deactivated for continuous operation.
- Audible and Visible Alarms alert the user to setpoint deviations. Audible alarm can be muted.
- Multi-Function Reservoir humidifies chamber to reduce sample evaporation and protect unit from spills. Built-in drain facilitates clean up.
- Spill Cover Ensures Electronics & Mechanical Components Are Protected From Accidental Spills.
- Unique Sensors limit speed when shaker is unbalanced, stops shaker when excess vibration is detected or door opened, and shuts off temperature when high-temperature limit is exceeded.
- Certified. Meets CSA, UL and CE standards.
General Specifications
There are no General Specifications available.
Series Modals
New Brunswick Scientific - Innova 42
[+] View Model Specifications| Depth | 29.7 in |
| Height | 32.2 in |
| Width | 25 in |
| Power Requirements | 120V 60 Hz; 230V 50 Hz; 100V 60 Hz; 100V 50 Hz |
| Weight | 216 lbs |
| Shaking Speed | 25 to 400 rpm, with 3/4 |
| Temperature Accuracy | 0.1 °C at 37°C, with a nominal uniformity of ± 0.25°C |
| Additional Model Specifications | Heaters: Low watt-density, resistance-type heaters with high-temperature safety thermostat cut off Drive Mechanism: Triple-eccentric counterbalanced drive in cast-iron housing with 9 permanently lubricated ball bearings. Solid-state brushless D.C. motor Safety: Sensors limit speed when shaker is unbalanced, stops shaker when excess vibration is detected or door opened, and shuts off temperature when high-temp. limit is exceeded Computer Interface: RS-232 for data logging and control using laboratory management software or HyperTerminal Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display) Illumination Chamber: 2 internal 12V, 10 Watt halogen lights illuminate chamber Illumination Photosynthetic: Optional for Model 42R only. Programmable Photosynthetic Light Bank with (6) 15-Watt Gro-Lux lights and an internal on-off switch Ambient Conditions: Temperature: 10°C - 35°C. Humidity: 20% to 80% non-condensing |
New Brunswick Scientific - Innova 42R
[+] View Model Specifications| Depth | 29.7 in |
| Height | 32.2 in |
| Width | 25 in |
| Power Requirements | 120V 60 Hz; 230V 50 Hz; 100V 60 Hz; 100V 50 Hz |
| Weight | 266 lbs |
| Shaking Speed | 25 to 400 rpm, with 3/4 |
| Temperature Accuracy | 0.1 °C at 37°C, with a nominal uniformity of ± 0.25°C |
| Additional Model Specifications | Heaters: Low watt-density, resistance-type heaters with high-temperature safety thermostat cut off Drive Mechanism: Triple-eccentric counterbalanced drive in cast-iron housing with 9 permanently lubricated ball bearings. Solid-state brushless D.C. motor Safety: Sensors limit speed when shaker is unbalanced, stops shaker when excess vibration is detected or door opened, and shuts off temperature when high-temp. limit is exceeded Computer Interface: RS-232 for data logging and control using laboratory management software or HyperTerminal Setpoint Retention: Setpoints and operating status retained by non-volatile memory. Automatic restart after power is restored (indicated by flashing display) Illumination Chamber: 2 internal 12V, 10 Watt halogen lights illuminate chamber Illumination Photosynthetic: Optional for Model 42R only. Programmable Photosynthetic Light Bank with (6) 15-Watt Gro-Lux lights and an internal on-off switch Ambient Conditions: Temperature: 10°C - 35°C. Humidity: 20% to 80% non-condensing |