Zinsser NA - CombiDancer

Manufactured by  Zinsser NA
Follow this Equipment

A high speed evaporator for precise evaporation control

Evaporating large numbers of samples efficiently is an important step in sample preparation in e.g. solid phase extraction in the analytical laboratory, in combinatorial chemistry, high throughput screening or when employing new technologies. Samples must be processed rapidly, reproducibly and in a controlled manner to ensure their structural integrity is maintained. With its sophisticated pump technology for the precise control of evaporation (complying with GLP and GMP), CombiDancer can evaporate highly volatile solvents such as methanol or ethanol, water or less volatile solvents such as dimethylformamide (DMF) or dimethylsulfoxide (DMSO), or solvent mixtures even containing water, both rapidly and reproducibly.

CombiDancer utilises a combination of heating, vortexing, and vacuum in the evaporation process unlike the more common centrifugation technique. Vortexing has various advantages over centrifuging - it enlarges the evaporation surface distributing the heat evenly in the sample and there is no compression of the gas phase. CombiDancer can work with any vacuum pump, however we recommend the Vacuubrand PC 3003 VARIO diaphragm pump for the precise control of the evaporation process.

The samples are uniformly heated by infrared lamps (1,000 W). An independent compartment heater prevents the condensation of solvents with high boiling point in the vacuum chamber. The actual temperature can be measured directly in the sample by means of a PTFE-coated temperature sensor. All heating, vortexing and vacuum parameters can be programmed and controlled separately.
Active Questions & AnswersAsk a Question

There are no current Discussions

Vortex Service ProvidersView All (9)

Request Support
Features of CombiDancer
Vortexing:
  • No balancing of the samples
  • No compression of the gas phase
  • No rotating parts
Heating:
  • Heating of the sample surface
  • Independent compartment heater
  • Measurement of sample or rack temperature
Vacuum:
  • Automatic vapour sensor
  • No hysteresis
  • Controllable pump frequency
General Specifications
Depth 695 mm
Height470 mm
Width 765 mm
Power Requirements 230 V, 50/60 Hz
Rotation Speed200 to 1200 rpm
Peak Power1.89 kVA
Weight80 kg
Evaporator TypeVortex

Looking for New or Used Equipment?

Shop on LabX

Shop on Labx.com