Dionex - UltiMate® 3000 Rapid Separation Autosampler
Rapid Separation LC (RSLC) Autosampler
The UltiMate® 3000 Rapid Separation Autosampler is the only UHPLC autosampler that robustly injects up to 500 µL at pressures up to 15,000 psi (103.4 MPa). This wide injection-volume flexibility makes the module suitable for both UHPLC and conventional HPLC applications. The in-line split-loop (or flow-through) injection design of the module provides highly accurate and precise delivery of the sample with ultralow carryover.
Active Questions & AnswersAsk a Question
There are no current Discussions
Need Equipment Support?
Documents & ManualsView All Documents
Features of UltiMate® 3000 Rapid Separation Autosampler
- Injection volume precision typically 0.9999 (5–90 µL) due to high-precision drive mechanism
- Wide injection volume range from 1–100 µL (default configuration) for maximum injection flexibility
- Optional injection volume ranges of 0.2–25 µL, 1.5–200 µL, and 1.5–500 µL available
- Low gradient delay volume of 140 µL (default configuration) or 50 µL (with 25 µL sample loop)
- Volumetric accuracy better than ±0.5% for 20 µL injections for easy method transfer
- Supports well plates and short injection cycle times for high-throughput applications
- Sample thermostatting for optimal protection of thermally-sensitive analytes (WPS-3000TRS)
General Specifications
| Depth | 51 cm |
| Height | 36 cm |
| Width | 42 cm |
| Power Requirements | 100–120 V, 60 Hz / 200–240 V, 50 Hz |
Additional Specifications
Sample Capacity:
216 × 0.3 mL vials,
120 × 1.1 mL conical vials,
216 × 1.2 mL vials,
120 × 1.8 mL/2.0 mL vials,
66 × 4 mL vials,
30 × 10 mL vials,
3 x 24 deep well plates, 96 and/or 384 normal or deep well plates,
3 x 40 0.5 mL and/or 1.5 mL Eppendorf tubes, and/or 3 x 384 low well PCR plates
+ 15 × 10 mL vials (depending on sample tray configuration)
Injection Methods:
In-line split-loop injections, bypass mode, user-defined programs
Injection Volume Accuracy:
±0.5% at 20 µL
Minimum Sample Required:
1 µL out of 5 µL (250 µL conical vial)
Injection Volume Precision:
0.9999, RSD <0.5% at 5–90 µL, caffeine in water
Needle Wash:
Active external
Injection Cycle Time:
<15 seconds for 5 µL
Sample Thermostatting:
Sample Temperature Accuracy:
±2 °C
PC Connection:
USB
I/0Iinterfaces:
4 digital inputs and 4 programmable outputs