Microfluidics - M-700 Series
Manufactured by Microfluidics
M-700 Series Microfluidizer processors combine superior, scaleable results for pilot and production environments
Microfluidics produces patented Microfluidizer processor equipment with high-pressure, fixed-geometry interaction chambers that impart high shear rates to product formulations. The M-700 generates up to 30,000 psi operating pressure (40,000 psi available as special option) for premium results at an affordable cost.
Active Questions & AnswersAsk a Question
Recent Questions & Answers
Asked byCristi5709
Need Equipment Support?
Documents & ManualsView All Documents
Features of M-700 Series
- Proven to be highly reliable at operating pressures up to 30,000 psi in pilot and production environments.
- Generates the highest shear rates of any fluid processor on the market today. This results most often, in achieving desired product quality in a single pass.
- Patented interaction chamber — wear-resistant construction; geometrically fixed design ensures that entire product stream will encounter equal energy per unit fluid volume.
- Model M-7250 units are standard with two synchronized intensifier pumps for increased flow rates.
- In-line cleaning with no disassembly required
- All stainless steel construction.
General Specifications
There are no General Specifications available.
Series Modals
Microfluidics - M-7115
[+] View Model SpecificationsDepth | 29 in |
Height | 57 in |
Width | 71 in |
Weight | 1500 lbs |
Additional Model Specifications | Pressure Range: up to 40,000 psi (2755 bar) Feed Temperature: Maximum 165°F (75°C) Power Requirements: 15 HP (11.1 kw), 3 phase electrical service, 208/230/380/460/575V Utility Requirements: Cooling water for hydraulic oil heat exchanger and process fluid heat exchanger, compressed air (50-150 psi 1 scfm@ 50 psi, pressure dew point of 0-35°F) Flowrate @ 25 strokes/min 10K: 1.24 gpm (4.74 lpm) 20K: .64 gpm (2.44 lpm) 30K: .40 gpm (1.53 lpm) |
Microfluidics - M-7125
[+] View Model SpecificationsDepth | 29 in |
Height | 57 in |
Width | 71 in |
Weight | 1700 lbs |
Additional Model Specifications | Pressure Range: up to 40,000 psi (2755 bar) Feed Temperature: Maximum 165°F (75°C) Power Requirements: 25 HP (18.5 kw), 3 phase electrical service, 208/230/380/460/575V Utility Requirements: Cooling water for hydraulic oil heat exchanger and process fluid heat exchanger, compressed air (50-150 psi 1 scfm@ 50 psi, pressure dew point of 0-35°F) Flowrate @ 25 strokes/min 10K: 2.06 gpm (7.78 lpm) 20K: 1.05 gpm (3.96 lpm) 30K: .67 gpm (2.53 lpm) |
Microfluidics - M-7250
[+] View Model SpecificationsDepth | 29 in |
Height | 57 in |
Width | 71 in |
Weight | 2000 lbs |
Additional Model Specifications | Pressure Range: up to 40,000 psi (2755 bar) Feed Temperature: Maximum 165°F (75°C) Power Requirements: 50 HP (37 kw), 3 phase electrical service, 208/230/380/460/575V Utility Requirements: Cooling water for hydraulic oil heat exchanger and process fluid heat exchanger, compressed air (50-150 psi 1 scfm@ 50 psi, pressure dew point of 0-35°F) Flowrate @ 25 strokes/min 10K: 4.13 gpm (15.6 lpm) 20K: 2.11 gpm (7.97 lpm) 30K: 1.35 gpm (5.10 lpm) |