Labconco - Protector Multi-Hazard Glove Boxes
Manufactured by Labconco
Provide a physical barrier to protect the user from hazardous materials such as low level radioisotopes and carcinogens.
Protector Multi-Hazard Glove Boxes provide a physical barrier to protect the user from hazardous materials such as low level radioisotopes and carcinogens.
This model has been discontinued.
This model has been discontinued.
Active Questions & AnswersAsk a Question
There are no current Discussions
Glove Boxes Service ProvidersView All (2)
Documents & ManualsView All Documents
Features of Protector Multi-Hazard Glove Boxes
- Laminated safety glass viewing window with one-piece, molded neoprene gasket seal* Two interior electrical receptacles separately controlled by individual switches on the front panel* Neoprene gloves, size 9 3/4", are included.* Comfortable, 8" diameter glove ports* 30-watt fluorescent lamp provides interior lighting.* Epoxy-coated steel exterior* Large transfer chamber allows easy transfer of materials between the laboratory and box while maintaining an established glove box environment.* Space-saving inner and outer transfer chamber doors* High efficiency polyester prefilter lengthens the life of the inlet HEPA filter by trapping large particles.* Inlet and outlet HEPA filter, 99.99% efficient on particulates 0.3 micron in diameter, prevent contaminants from entering or leaving the glove box chamber.* Built-in blower with blower speed control permits the box's interior atmosphere to be vented to the outside.* 3” square collar allows connection to ducting system.* Pressure differential gauge enables the user to monitor glove box pressures and inlet HEPA filter loading.* Control switches for the fluorescent lamp and interior electrical receptacles are conveniently located on the control panel.* ETL listed (115 volt models)* CE Conformity (230 volt models)
General Specifications
There are no General Specifications available.
Series Modals
Labconco - 5065000
[+] View Model Specifications| Depth | 31.1 in |
| Height | 46.4 in |
| Width | 62.4 in |
| Internal Width | 35.5 in |
| Power Requirements | 115 volts, 60 Hz, 15 amps |
| Number of Glove Ports | 2 |
| Glove Box Construction | Fiberglass |
| Glove Box Type | Stand Alone |
| Ducting | Ductless |
| Part Number | 5065000 |
| Additional Model Specifications | Protector Fiberglass Multi-Hazard Glove Box Primary Application: Work with hazardous materials Electrical Requirements: Domestic Power Cord & Plug: 115 volts, 15 amps Required Accessories: supporting base Built-In Options: None Compliance: ETL, UL 3101-1/61010-1 |
Labconco - 5065500
[+] View Model Specifications| Depth | 31.1 in |
| Height | 46.4 in |
| Width | 62.4 in |
| Internal Width | 35.5 in |
| Power Requirements | 115 volts, 60 Hz, 15 amps |
| Number of Glove Ports | 2 |
| Glove Box Construction | Stainless Steel |
| Glove Box Type | Stand Alone |
| Ducting | Ductless |
| Part Number | 5065500 |
| Additional Model Specifications | Protector Stainless Steel Multi-Hazard Glove Box Primary Application: Work with hazardous materials Electrical Requirements: Domestic Power Cord & Plug: 115 volts, 15 amps Required Accessories: supporting base Built-In Options: None Compliance: ETL, UL 3101-1/61010-1 |
Labconco - 5065520
[+] View Model Specifications| Depth | 31.1 in |
| Height | 46.4 in |
| Width | 108.6 in |
| Internal Width | 81.8 in |
| Power Requirements | 115 volts, 60 Hz, 30 amps |
| Number of Glove Ports | 4 |
| Glove Box Construction | Stainless Steel |
| Glove Box Type | Stand Alone |
| Ducting | Ductless |
| Part Number | 5065520 |
| Additional Model Specifications | Protector Stainless Steel Double Multi-Hazard Glove Box Primary Application: Work with hazardous materials Electrical Requirements: Domestic Power Cord & Plug: 2 each 115 volts, 15 amps Required Accessories: supporting base Built-In Options: None Compliance: ETL, UL 3101-1/61010-1 |