This product is Discontinued

New Brunswick Scientific - BioFlo/CelliGen 115

Manufactured by  New Brunswick Scientific
Follow this Equipment

Benchtop Fermentor & Bioreactor

The BioFlo/CelliGen 115 Has Replaced The BioFlo 110  
  
The BioFlo/CelliGen 115 takes the complexity out of equipment selection, set-up and operation. It features a totally integrated control station with a color touchscreen interface, built-in pumps, gas flow controllers, pH/DO, foam/level controllers and more — no external PC needed. In fact, we’ve made it so simple, your new unit can be unpacked and ready for the autoclave in under a half hour.
Active Questions & AnswersAsk a Question

Recent Questions & Answers

avatar placemark

Asked byDoug Stemke

avatar placemark

Updated bybasmas

Fermenters / Bioreactors Service ProvidersView All (3)

Request Support
Features of BioFlo/CelliGen 115

Readily Adapts as Your Needs Change

  • Grow virtually any cell type: aerobic and anaerobic microbes, yeast, insect, plant and mammalian cells.  

  • Water-jacketed and heat-blanketed autoclavable glass vessels are offered in four sizes, 1.3, 3.0, 7.5 and 14.0 Liters (total volume).  

  • All 115 systems are pre-programmed with both cell culture and fermentation operating modes for total flexibility. Switching between modes automatically adjusts gas flow and speed ranges.  

  • BioFlo 115 AccessoriesA wide variety of options and accessories provide the versatility for customization to your exact needs. Choose from eight vessels, three motor drives, specialized impellers, up to four Rotameters with multiple gas flow ranges, a Thermal Mass Flow Controller (TMFC), and more.  

    Simple Operation  

  • Control and view up to three independent bioreactors/fermentors from a single touchscreen. Additional utility station(s) are required for simultaneous operation of a second or third vessel.  

  • Control screens are easy to understand and use – making the BioFlo/CelliGen 115 one of the most user-friendly systems on the market today.  

  • The same control software is featured on all New Brunswick benchtop fermentors and bioreactors, for easy transition to our larger-scale systems.  

    Intelligent Controls  

  • CelliGen 115Four-gas mix option automatically mixes two, three or four gasses in cell culture mode for optimized cell growth.  

  • Two-gas mixing option enables mixing air and oxygen in fermentation mode.  

  • Highly-customizable gas flow options allow you to design a system specific to your needs. Choose one, two, three or four manual Rotameters of various flow rates. Or select a digital TMFC.  

  • Built-in "cascade" feature automatically maintains DO setpoints. Control DO with agitation, gas and/or additions.  

  • Adjustable P-I-D values for pH and DO are automatically defined by vessel size or can be fine tuned for the ultimate in control flexibility.  

  • We make firmware updates quick and easy by offering free downloads from our website. No service technician or down-time.  

  • Compatible with NBS BioCommand® software for advanced control strategies and data logging.

General Specifications
Depth 16 in
Height26.6 in
Width 15.6 in
Power Requirements 100 - 230V 50/60 Hz • Single Phase • 100 - 120V: 10 Amps; 200 - 240V: 6 Amps
Additional Specifications

Total Volumes: 1.3 Liters, 3.0 Liters, 7.5 Liters, and 14.0 Liters  
  
Control Station & Utility Station  
Design: Compact control station with advanced integrated controller is capable of supporting up to two additional (optional) independent utility stations and vessels  
Display: 8.4” (21.3 cm) industrial color touchscreen display is standard on the control station. Not included on optional utility station(s).  
Function: Fermentation and cell culture monitoring and control  
  
Temperature  
Range: 70ºC maximum temperature  
(65ºC maximum temperature for 14.0L)  
Control:  
PID for heating and cooling  
Heat-blanketed Vessels: External heating blanket and immersed stainless steel  
cooling coil. Water-jacketed Vessels: Water jacket heater and circulation loop  
Sensor: Platinum RTD probe (Pt 100)  
  
Agitation  
Drive: Magnetic Drive or Direct Drive  
Range: Direct Drive: Ferm 50 - 1200 RPM; Cell Cult 25 - 400 RPM • Mag Drive: 25 - 200 RPM  
Control: PID control; manual, automatic, or cascade settings  
Impellers: Rushton-style standard with fermentation system. Pitched blade standard with cell culture. Optional: Marine blade and/or Spin filter  
Baffles: Removable 316L stainless steel; fermentation only  
  
Aeration  
Gas Flow Options:  
0 - 4 Rotameters: 0 -150 mLpm • 250 - 2500 mLpm • 1 - 5 Lpm • 1 - 20 Lpm (and more)   
1 Thermal Mass flow Controller (TMFC): 0.04 - 20 SLPM  
Gas Mixing: Options: Automatic 4-Gas Mixing & Manual Gas Mixing. Both via 4 gas manifold.  
Sparger: Standard: Ring Sparger • Optional: Microsparger  
Inlet Filter: 0.2 Μm Absolute filter  
N2 Gas: For calibration of DO probe  
  
pH  
Range: 2-14 pH  
Control: PID, link to pumps or gasses, adjustable deadband  
Sensor: pH probe  
  
DO  
Range: 0 - 200%  
Control: PID, cascade to agitation, gasses, gas flow if equipped with TMFC  
Sensor: Polaragraphic DO probe  
  
Exhaust  
Filter: 0.2Μm Absolute filter  
Condenser: Stainless steel counterflow, water-cooled in headplate

Looking for

New Brunswick Scientific - BioFlo/CelliGen 115?

Shop on LabX.com