GE Analytical Instruments - Sievers 900 Portable
The Sievers 900 Portable TOC Analyzer offers unequalled flexibility and ease of use.
The winner of IBO's Gold Portable Instrument Design in 2005, the 900 Portable was engineered for ease of use and cost-effective operation, requiring no external reagents or gas supplies. It can be used for single grab samples or in a process stream for continuous on-line TOC measurement. The Analyzer is the first and only general purpose, full-range portable TOC instrument available.
Active Questions & AnswersAsk a Question
There are no current Discussions
TOC Analyzers Service ProvidersView All (11)
Documents & ManualsView All Documents
Features of Sievers 900 Portable
Applications Versatility The Sievers 900 Portable Analyzer offers incomparable versatility in terms of applications and sampling modes. Weighing only 12.5 kg (27.5 lb), the 900 Portable Analyzer can be hand-carried to any sample points for on-line measurement. The 900 Portable also doubles as a lab instrument for either discrete samples or for TOC analysis using the 900 Autosampler. It has a dynamic TOC operating range of 0.03 ppb to 50 ppm.
Enhanced Ease of Use The 900 Portable TOC Analyzer is extremely easy to set up, operate and maintain.
Intuitive Touch Screen Interface A color touch-screen display makes it easy to set up instrument parameters and monitor results.
Low Maintenance aned Operating Costs The Sievers 900 Portable needs no external reagent or gas supplies and requires only a few hours per year of preventive maintenance.
Extended Calibration Stability The 900 Portable offers 12-month calibration stability. On-screen prompts guide users through various single- and multi-point calibration procedures.
Expanded Data Access The USB port allows data transfers from the Analyzer to a USB flash memory drive without interrupting analysis. To see a list of USB drives that are compatible with the 900 Series, click here.
Time Saving Features The 900 Portable provides automated calibration, verification, and data analysis reports. For diagnostic work, the Analyzer produces TOC data in minutes after connecting the sample line. For grab samples, the Integrated On-Line Sampling System (IOS System™) offers convenient introduction of samples and standards. The Autoreagent adjustment feature automatically establishes optimal reagent flow rates for all samples.
On-line and Grab Sampling The IOS System allows the easy introduction of external standards and samples without removing the instrument from the continuous sample source or changing the sample inlet configuration.
Reliability The Analyzer uses carefully selected materials and components to ensure maximum uptime and reliability.
General Specifications
| Depth | 18.3 in |
| Measurement Range | 0.03 to 50000 ppb |
| On-Line Monitoring | 1 |
| Height | 14 in |
| Width | 8.8 in |
| NDIR | 0 |
| Power Requirements | 100–240 ± 10% VAC, 50/60 Hz |
| Peak Power | 50 W |
| Weight | 27.5 lbs |
| Measurement Time | 4 minutes (4 seconds for the optional Turbo mode) |
| Portable | 1 |
Additional Specifications
Operating Specifications
Measurement Range: 0.03 to 50000 ppb
Precision: < 1% RSD
Accuracy: ± 2% or ± 0.5 ppb, whichever is greater
Display Readout: 3 significant digits
Sample Type: On-line continuous, Autosampler, or discrete grab sample
Calibration: Typically stable for 12 months
Sample Temperature: 1–95 °C (34–203 °F)
Ambient Temperature: 10–40 °C (50–104 °F)
Sample Pressure: Up to 250 psi
Sample Flow Rate: 50–300 mL/min (for on-line mode)
Instrument Sample Flow Rate: 0.5 mL/min
Analyzer Specifications
Outputs: 4-20mA output (1); Serial RS-232 output (2); USB port (1); parallel printer port (1)
Display: Quarter-VGA, color touch-screen display
Safety Certifications: ETL, CE see Declaration of Conformity
Consumables
UV Lamp: 6 months
Acid Reagent: As needed, typically 6 months (285 mL)
Oxidizer Reagent: As needed, typically 3-month stability; available in 150- or 300-mL cartridge